Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 120 mm, Parameterisable measuring range, Analog current or voltage output, programmable, Switching element function: Analog current or voltage output, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4), Output type: current output 4-20 mA voltage output 0 - 5 V DC 0 ... 10 V DC , programmablefa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 120 mm, Parameterisable measuring range, Analog current or voltage output, programmable, 2 Push-pull outputs, Switching element function: Analog current or voltage output, programmable 2 switch outputs, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4)fa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 120 mm, Parameterisable measuring range, Analog current or voltage output, programmable, 2 Push-pull outputs, Switching element function: Analog current or voltage output, programmable 2 switch outputs, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4)fa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 14 mm, Analog output 0 ... 10 V, Output polarity: DC, Type of voltage: DC, Interface type: IO-Link, Output type: Push-pull (4 in 1) output , short-circuit protected, Output type: voltage output 0 ... 10 V, UL approval: cULus Listed, General Purpose, Class 2 Power Source, Connection type: M8 connector, 4-pin, Housing material: PA 6, Degree of protection: IP67fa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 14 mm, Analog output 0 V ... 5 V, Output polarity: DC, Operating voltage: 18 ... 30 V DC, Type of voltage: DC, Interface type: IO-Link, Output type: voltage output 0 ... 5 V, UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: M8 x 1 connector, 4-pin, Housing material: PA 66, Degree of protection: IP67fa
Not available for purchase: Analog output 0 ... 10 V, Measuring range 0 ... 14 mm, Scaleable measurement range programmable via cable, 5 scaling positions progammable using teach in device PMI14V-Teach, Switching element function: Analog voltage output, Output polarity: DC, Type of voltage: DC, Output type: 1 voltage output: 0 ... 10 V, Connection type: 1 m, PUR cable, shielded, Housing: Zinc diecast, nickel-plated cover , PBTfa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 40 mm, Parameterisable measuring range, Analog current or voltage output, programmable, Switching element function: Analog current or voltage output, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4), Output type: current output 4-20 mA voltage output 0 - 5 V DC 0 ... 10 V DC , programmablefa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 40 mm, Parameterisable measuring range, Analog current or voltage output, programmable, 2 Push-pull outputs, Switching element function: Analog current or voltage output, programmable 2 switch outputs, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4)fa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 40 mm, Parameterisable measuring range, Analog current or voltage output, programmable, 2 Push-pull outputs, Switching element function: Analog current or voltage output, programmable 2 switch outputs, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4)fa
Not available for purchase: Parameterization and diagnosis via IO-Link, Measuring range 0 ... 80 mm, Parameterisable measuring range, Analog current or voltage output, programmable, Switching element function: Analog current or voltage output, programmable, Output polarity: DC, Operating voltage: 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized), Type of voltage: DC, Interface type: IO-Link (via C/Q = Pin 4), Output type: current output 4-20 mA voltage output 0 - 5 V DC 0 ... 10 V DC , programmablefa
UC18GS series ultrasonic sensors reliably detect the container level of liquids and granules, regardless of their color and other optical properties. Learn more about the UC18GS ultrasonic sensor seri detected in the measuring range. Technical Features: Measuring range up to 1000 mm Very small dead bands of 30 mm resp. 70 mm Interfaces: IO-Link 1.1, infrared interface IrDA Output types: 2x push-pull switching output or 1x push-pull switching output and 1x analog output (current/voltage) Ambient temperature: –25 to +70 °C Degree of protection: IP67 The sound beam of the UC18GS series ultrasonic sensors is individually configurable. The Benefits The sensor has an IO-Link interface and can be
IO-Link enables consistent, bidirectional communication between the control system and the lowest sensor/actuator level via standard, unshielded three-core cable. Read more about IO-Link ...インテリジェント・通信テクノロジー―IO-Link センサとアクチュエータの技術は急速に発展しています。 ただ単に、ON/OFFやアナログデータを伝送するだけのものではなく、マイクロプロセッサの進歩によってますます高度な機能を備えるようになりました。 これらは実際のセンサ機能を超越した付加価値がある デバイス知能 の基礎を作ります。IO-Linkセンサは、測定値やON/OFF情報だけではなく、パラメータを保存や信号の品質やデバイスの状態のような 付加情報 を伝送することができます。 稼働中のパラメータ設定変更によって、 システムの柔軟性 と バッチサイズ1の生産 を可能にします。 IO-Linkは、メーカに依存しないセンサ、アクチュエータの通信技術として、グローバルに標準化されています。 IEC61131-9規格 を満たし、業界のどんなフィールドバスにも互換性があります。最も簡単なセンサとアクチュエータは、ON/OFF信号、識別、診断データを非シールド3線式ケーブルで伝送します。これによって、制御システムと現場のセンサ/アクチュエータレベルとの 一貫した双方向通信 を構築しま
Pepperl+Fuchs offers a wide range of industrial technologies to support your factory automation applications... various applications. IO-Link ― インテリジェント通信テクノロジー IO-Linkは、制御システムからセンサ/アクチュエータ・レベルへの双方向通信を可能にする国際的に標準化されたクロスベンダIOテクノロジーです。 超音波テクノロジー ― 多用途で信頼性の高いセンサ・ソリューション 木材、金属、プラスチック、 色付き、反射、透明、 固体、液体、粉末 - 超音波テクノロジーの多様性はほぼ無限です。 超音波テクノロジーは素材、表面の種類、色に影響をうけないことを、幅広い
Switching sensors with an R100-series measurement core are perfectly suited to detect two different stacking heights. Read in this application report how the photoelectric sensors allows continuous op, the measurement core can be integrated even in the smallest sensor. Two switching outputs, independent switch points, a variety of operating modes , and IO-Link ensure maximum flexibility . R100 Series at a Glance Optimizing processes, increasing efficiency—with versatile, adjustable sensors Two sensors in one—sensors with two switch points due to Multi Pixel Technology Reliable, precise, and noise-immune distance measurement Maximum flexibility with IO-Link Reduced costs in purchasing and logistics
This glossary gives you an overview of the most important terms and their meanings used in connection with IO-Link ...IO-Link Glossary COM Describes an operation mode, in which messages are transfered via a IO-Link communication between a device and a master and represents one of the three possible SDCI communication modes "COM1", "COM2" or "COM3". SDCI communication mode Fundamental IO-Link technology. A digital interface that enables communication from point to point. Device type manager Device driver component for a device in an FDT environment. A DTM can represent the functionality of a device via a
IO-Link masters with multiple ports are often used for applications in which several devices are to be connected to one industrial Ethernet block. For integrating discrete standard sensors into the intelligent network, I/O hubs are used. Learn more …I/O Hubs IO-Link masters with multiple ports are often used for applications in which several devices are to be connected to one industrial Ethernet block . If users want to integrate discrete standard sensors into the intelligent network, they can use so-called I/O hubs . This comparatively inexpensive solution allows users to connect several standard sensors at once to an I/O hub . Due to the integrated I/O-Link interface , they can be connected to the IO-Link master so that only a single port
See Overview: Industrial Ethernet from Pepperl+Fuchs creates a consistent network infrastructure. It enables the collision-free and transparent transfer of both real-time and IT data. プロトコルは、厳しいリアルタイムの必要条件を満しています。 クラウドベースのアプリケーション を実現するためには、現場とコントロールレベルのデータを、 高い信頼性と透過性で連続して 、クラウドまで伝送することを必要とします。Pepperl+Fuchs、 Pepperl+Fuchs Comtrol は、シリアルデータを転送する包括的ソリューション、RFID、IO-Linkセンサなどの製品群を提供しています。 産業用イーサネットスイッチ、シリアルゲートウェイ、Pepperl+Fuchs Comtrolの OPC UA対応 IO-Linkマスタは、最下層のセンサ/アクチュエータレベルと上位のクラウドレベルの橋渡しをします。これによって、 未来指向のIoTアプリケーション を利用する可能性が広がります。更なるIO-Linkポートフォリオによって、産業ネットワーク通信を、より効率的でフレキシブなサポートで提供しています、その結果、デジタル・ビジネス・プロセスがさらに発展することでしょう。 イーサネットスイッチ Made for use in demanding applications, the
With the acquisition of the business of Comtrol Corporation, a US-based pioneer in industrial Ethernet communication and IO-Link gateways, Pepperl+Fuchs is completing its portfolio of future-oriented Industry 4.0 solutions for cloud-basedPepperl+Fuchs Comtrol | Complete Infrastructure for IoT Applications Seamless Communication 製品概要 IO-Linkマスタ RocketLinx🄬スイッチ シリアル ゲートウェイ インフラ お問い合わせ Seamless Communication at Every Level クラウドベースのIoTアプリケーションのためのインフラ IoTアプリケーションのための完全なインフラストラクチャ 産業用イーサネット通信とIO-リンクマスタの米国マーケットのパイオニアのComtrol 社ビジネスの獲得によって、Pepperl+Fuchsは先を見据えたIndustry4.0ソリューションの最適なラインアップを広げています。 産業用イーサネットスイッチを装備したイーサネットベースの 通信機器とフィールドインタフェース機器 、シリアルをイーサネットに変換するゲートウェイ、 OPC UA準拠 のIO-リンクマスタなどの製品群を広げることによって、Pepperl+Fuchsは、フィールド機器から 直接クラウドへ