Fabrika Otomasyonu
Proses Otomasyonu
Satışta değil

Inductive sensor NMB5-18GM55-E2-NFE

  • Stainless steel sensing face
  • Sensing range 5 mm
  • 3-wire DC
  • Nonferrous targets

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler  NMB5-18GM55-E2-NFE

General specifications
Switching functionNormally open (NO)
Output typePNP
Rated operating distance5 mm
Installationflush in mild steel
Output polarityDC
Assured operating distance0 ... 4.05 mm
Actuating elementNonferrous targets
Reduction factor rAl 1
Reduction factor rCu 1.1
Reduction factor r304 0
Nominal ratings
Operating voltage10 ... 30 V
Switching frequency0 ... 30 Hz
Hysteresis3 ... 15 typ. 5 %
Reverse polarity protectionyes
Short-circuit protectionyes
Voltage drop≤ 2 V
Operating current0 ... 200 mA
Current consumption< 14 mA
Off-state current≤ 10 µA
Indicators/operating means
Operation indicatorDual LED
Green: power
Yellow: output
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type2 m PUR cable
Core cross-section0.5 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing faceStainless steel 1.4305 / AISI 303
Housing diameter18 mm
Degree of protectionIP69K

İlişkili Ürünler: NMB5-18GM55-E2-NFE

Mounting aidfa