RFID read/write device IUT-F190-B40-2V1D-FR2-07
- Compact, high-performance UHF RFID read/write device for medium detection ranges
- Rugged housing for harsh industrial environments
- Switchable antenna polarization and multi-tag reading
- Clearly visible LED status indicator
- Integrated 2-port switch enables line or ring topology
- Simple operation and configuration via integrated web server
- OPC UA Server and AutoID Companion Specification enable standardized communication
- Easy integration into IT systems via REST API
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Veri sayfası alıntısı: Teknik veriler IUT-F190-B40-2V1D-FR2-07
| Ürün Açıklaması |
|---|
| UHF RFID read/write device, Brazil and Colombia |
| General specifications | ||
|---|---|---|
| Operating frequency | 915 … 928 MHz: Brazil, Colombia Transmission licenses for other countries on request |
|
| Emitted power | 3 … 1250 mW EIRP adjustable | |
| MTBF | 55 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | Read/write operation successful | |
| LED blue | Transmission mode | |
| LED Link/Traffic | green: network connection yellow: flashes in rhythm with the transmitted data |
|
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 500 mA | |
| Power consumption | ≤ 10 W | |
| Surge protection | category 2 | |
| Interface 1 | ||
| Physical | Ethernet | |
| Protocol | HTTP (REST API) OPC UA (AutoID Companion Specification) EtherNet/IP PROFINET IO |
|
| Transfer rate | 10 MBit/s or 100 MBit/s | |
| Interface 2 | ||
| Physical | Ethernet | |
| Protocol | HTTP (REST API) OPC UA (AutoID Companion Specification) EtherNet/IP PROFINET IO |
|
| Transfer rate | 10 MBit/s or 100 MBit/s | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 18000-63 | |
| Approvals and certificates | ||
| ANATEL approval | 05576-24-06150 | |
| Ambient conditions | ||
| Classification | Environmental condition A (controlled environment) | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) (Operation with nontransmission periods, adjustable) -20 ... 50 °C (-4 ... 122 °F) (Continuous transmission mode) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | Power supply: M12 connector Protective earth: M4 earthing screw Ethernet: M12 plug connection |
|
| Material | ||
| Housing | PA 6.6 | |
| Base | diecast aluminum | |
| Mass | 820 g | |
| Dimensions | ||
| Height | 63 mm | |
| Width | 112 mm | |
| Length | 114 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IUT-F190-B40-2V1D-FR2-07
The compact read/write device IUT-F190-B40-2VD1-* operates in the UHF frequency range and is optimized for industrial use over medium distances. The device writes and reads passive transponders according to EPC Gen2 (ISO/IEC 18000-63). The read/write device complies with the respective local radio regulations.
Extensive possibilities for data filtering are supported. The read/write device has an ethernet interface and is connected via an M12 connector. The user can monitor the status of the read/write device using the integrated LEDs.
The read/write device has a typical detection range of about 2 m, which is determined by the transponder used and can be adjusted by setting the transmission power. Further influencing factors are the mounting or installation for the specific application and the surrounding materials, especially metal. The separately specified read and write distances for the respective transponders have been determined in a test laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination read/write device and transponder must be tested in the desired application.
Datasheet: IUT-F190-B40-2V1D-FR2-07
| Datasheet | Dosya Tipi | Dosya Boyutu |
|---|---|---|
| Datasheet IUT-F190-B40-2V1D-FR2-07 | 735 KB | |
| Datenblatt IUT-F190-B40-2V1D-FR2-07 | 737 KB |
Documents: IUT-F190-B40-2V1D-FR2-07
CAD+CAE: IUT-F190-B40-2V1D-FR2-07
| CAD | Dosya Tipi | Dosya Boyutu |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 4300 KB |
Approvals+Certificates: IUT-F190-B40-2V1D-FR2-07
| Certificates | Dosya Tipi | Dosya Boyutu |
|---|---|---|
| Brasil Radio Approval | 85 KB | |
| Colombia Radio Approval | 261 KB | |
| ODVA Ethernet/IP | 126 KB |
Commissioning: IUT-F190-B40-2V1D-FR2-07
Software: IUT-F190-B40-2V1D-FR2-07
| Device Driver | Dosya Tipi | Dosya Boyutu |
|---|---|---|
| EDS / EDS | ZIP | 17 KB |
| GSD / GSD | ZIP | 125 KB |
| Software Tools | ||
| Add-On instructions for Rockwell Automation Studio 5000 software. For parameterization and read/write functionality on IUT-...-B40, IUT-...IO and IQT3-...-IO Readers / Software Tool_a | ZIP | 227840 KB |
| Firmware | ||
| Firmware / Firmware | ZIP | 1975 KB |
İlişkili Ürünler: IUT-F190-B40-2V1D-FR2-07
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Orta algılama aralıkları için tasarlanan ve OT ve BT sistemlerine hızlı ve kolay bir şekilde entegre edilebilen yeni IUT-F190-B40'a göz atın …
RFID için bir bilgi bankası niteliği taşıyan özel "RFID Hub" web sitemizi ziyaret edin. Sık sorulan sorulara yanıt alın ve tipik RFID uygulamaları hakkında bilgi edinin…
Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
+90 216 577 2250
Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.