Connection: backplane bus, Directive 2014/30/EU: EN 61326-1:2013, Electromagnetic compatibility: NE 21, Degree of protection: IEC 60529, Environmental test: EN 60068-2-14, Shock resistance: EN 60068-2-27, Vibration resistance: EN 60068-2-6, Damaging gas: EN 60068-2-42, Relative humidity: EN 60068-2-78, Ambient temperature: -40 ... 60 °C (-40 ... 140 °F), Storage temperature: -40 ... 85 °C (-40 ... 185 °F), Relative humidity: 95 % non-condensing, Shock resistance: shock type I, shock duration 11 ms, shock amplitude 50 m/s2, number of shock directions 6, number of shocks per direction 100, Vibration resistance: frequency range 5 ... 500 Hz, amplitude 5 ... 13.2 Hz ± 1.5 mm, 13.2 ... 100 Hz 1g, sweep rate 1 octave/min, duration 10 sweeps 5 Hz - 100 Hz - 5 Hz, Damaging gas: designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3, Degree of protection: IP20 (module) , a separate housing is required acc. to the system description, Mass: approx. 350 g, Dimensions: 28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch), Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018, System information: The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate., Supplementary information: EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. - Terminates bus, service bus, or both depending on model, Module can be exchanged under voltage (hot swap), Active termination of the fieldbus, Installation in suitable enclosures in Zone 1