Distance sensor VDM28-8-L/115/136
- Distance measurement using object
- Measuring method PRT (Pulse Ranging Technology)
- Accurate, clear, and reproducible measuring results
- Minimal black-white difference
- Red laser as the light emitter
- Version with laser class 2
注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。
データシート(PDF):
技術データ VDM28-8-L/115/136
| 型番 |
|---|
| Universal distance sensor, measurement to object, PRT measuring method, 8 m detection range, red laser light, laser class 2, push-pull output, fixed cable |
| General specifications | ||
|---|---|---|
| Measurement range | 0.2 ... 8 m | |
| Reference target | Kodak white (90%) | |
| Light source | laser diode typ. service life 85,000 h at Ta = +25 °C |
|
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 660 nm | |
| Beam divergence | 1 mrad | |
| Pulse length | 5 ns | |
| Repetition rate | 250 kHz | |
| max. pulse energy | < 4 nJ | |
| Angle deviation | max. ± 2° | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Diameter of the light spot | < 10 mm at a distance of 8 m at 20 °C | |
| Ambient light limit | 50000 Lux | |
| Temperature influence | typ. ≤ 0.25 mm/K | |
| Functional safety related parameters | ||
| MTTFd | 200 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 LEDs yellow for switching state | |
| Teach-in indicator | Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
|
| Control elements | 5-step rotary switch for operating modes selection (threshold setting and operating modes) | |
| Control elements | Switch for setting the threshold values | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , class 2 | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 125 mA / 24 V DC | |
| Time delay before availability | 1.5 s | |
| Output | ||
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Switching frequency | 50 Hz | |
| Response time | 10 ms | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Measurement accuracy | ||
| Absolute accuracy | ± 25 mm | |
| Repeat accuracy | < 5 mm | |
| Approvals and certificates | ||
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 50 °C (-22 ... 122 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 2 m fixed cable | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | Plastic pane | |
| Mass | 90 g | |
| Dimensions | ||
| Height | 88 mm | |
| Width | 25.8 mm | |
| Depth | 54.3 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM28-8-L/115/136
Product Documentation: VDM28-8-L/115/136
| Brief Instructions | 言語 | ファイルタイプ | ファイルサイズ |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 600 KB |
Design / Simulation: VDM28-8-L/115/136
| CAD | 言語 | ファイルタイプ | ファイルサイズ |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1711 KB |
Approvals: VDM28-8-L/115/136
| Certificates | 認証番号 | 言語 | ファイルタイプ | ファイルサイズ |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB | |
| IO-Link Manufacturer Declaration | PF 13 CERT 2631 | ALL | 275 KB |
関連製品: VDM28-8-L/115/136
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...
株式会社 ピーアンドエフ
〒220-0022
神奈川県横浜市西区花咲町6-145
横浜花咲ビル5F 日本
日本
sales@jp.pepperl-fuchs.com
+81 45 6249077
株式会社ピーアンドエフ
大阪府豊中市新千里東町1-5-3
千里朝日阪急ビル15階
〒560-0082 大阪
日本
sales@jp.pepperl-fuchs.com
+81 6 6836-5620
© 2024 All Rights Reserved.
Pepperl+Fuchsはグローバルオートメーション市場向けにセンサや部品の開発を行っており、革新的かつ高品質な技術躍進のために日々努力を続けています。ドイツ・アメリカ・シンガポール・ハンガリー・インドネシア・ベトナムに生産拠点があり、すべての工場でISO9001認証を取得しています。