Analog output, load-dependent voltage or current, Parameterisable measuring range, Measurement range: max. 360° min. 45°, Operating voltage: 18 ... 30 V DC, Output type: current output or voltage output (load dependend) 4 ... 20 mA (RL < 400 Ω) 0 ... 10 V (RL > 3.3 kΩ), UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connectorfa
Aankoop niet mogelijk: Measuring range 0 ... 360°, Analog output 4 mA ... 20 mA, Option of parameterizing signaling zone, position and width, Output polarity: DC, Measurement range: 360°, Type of voltage: DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected, Output type: 1 current output: 4 ... 20 mA, UL approval: cULus Listed, General Purpose Class 2 power source, Connection type: 5-pin, M12 x 1 connector, Housing material: PBT, Degree of protection: IP67fa
Aankoop niet mogelijk: Position sensor for PAX001, Measuring range 0 ... 360°, RS 232 transmission, Operating voltage: 18 ... 30 V DC, Type of voltage: DC, Interface type: RS 232, for communication with interface box PAX..., UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connector, Housing material: PBT, Degree of protection: IP67fa
The PMI360D-F130-IE8-V15 analog measuring system from Pepperl+Fuchs is highly reliable and guarantees an error-free production process ... inevitable. Implementation The PMI360D-F130-IE8-V15 analog meaurement system from Pepperl+Fuchs is mounted directly onto the shaft of the chain drive. The required distance 4 mA … 20 mA positions from 0° … 360° are detected with absolutely no errors. Fig. 2 ...
In the textiles industry, the constant flow of material is typically regulated using jockey rollers or compensating rollers The PMI360D-F130 analog measurement system from Pepperl+Fuchs offers an optimum solution for monitoring textile machinery ... potentiometric sensors were frequently used, but they are often unreliable in unfavorable operating conditions. Implementation The PMI360D-F130 analog measurement system offers an optimum solution for this task. The non contact sensing system and IP67 housing ...
Pepperl+Fuchs' PMI360D-F130 inductive sensor for angle measurement provides non-contact position detection for rotation movements, and is suitable for a wide range of position detection applications on the factory floor ... inductive sensor technology. With a measuring range of 0...360° and two switching points, which can be individually programmed on the device, the PMI360D-F130 inductive angle measurement sensor is suitable for a wide range of position detection applications ...
1-3/3Items per pagina:
Niet gevonden ?
Hint: plaats een * voor uw zoekwoord, verander uw zoekterm, controleer uw zoekterm op spellingsfouten, of neem contact met ons op.