High temperature identification system OIT500-F113-B12-CB3

High-temperature code carrier up to 500 °C (932 °F)
Sturdy and compact design
Integrated illumination
High operating range
Large sensing range
High depth of focus

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for OIT500-F113-B12-CB3

Produktbeskrivelse
Optical high temperature identification system, 300 to 450 mm

General specifications
Light source		Integrated LED lightning
Light type		infrared
Symbologies		CB1: perforated matrix 6 x 6 6 decimal digits CB3: hole pattern 3 x 12 12 binary digits
Read distance		CB1: 300 ... 450 mm CB3: 350 ... 400 mm
Reading field		340 mm x 210 mm at max. read distance
Evaluation frequency		5 Hz
Target velocity		triggered max. 1.5 m/s
Functional safety related parameters
MTTF_d		51 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: supply LED green: ready
Function indicator		Yellow LED: trigger Yellow LED: code read Red LED: pre-fault Red LED: group error
Electrical specifications
Operating voltage		24 V DC ± 15% , PELV
Operating current		250 mA without output drivers
Interface
Physical		Ethernet
Protocol		TCP/IP
Transfer rate		100 MBit/s
Input
Input voltage		24 V ± 15% PELV
Number/Type		1 trigger input 3 control unit inputs
Input current		approx. 1 mA at 24 V DC
Output
Number/Type		1 conventional electronic output, PNP
Switching voltage		24 V ± 15 % PELV
Switching current		100 mA each output
Conformity
Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61326-1:2013
Photobiological safety		EN 62471:2008 exempt group
Approvals and certificates
CE conformity		CE
Ambient conditions
Ambient temperature		0 ... 45 °C (32 ... 113 °F)
Storage temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP64
Connection		8-pin Harting HAN RJ-45 2 x 5-pin M12 socket
Material
	Housing	diecast aluminum powder coated
Mass		approx. 4000 g
Dimensions
	Height	101 mm
	Width	261 mm
	Depth	171 mm

Classifications

System	Classcode
ECLASS 13.0	27280103
ECLASS 12.0	27280103
ECLASS 11.0	27280103
ECLASS 10.0.1	27280103
ECLASS 9.0	27280103
ECLASS 8.0	27280103
ECLASS 5.1	27280103
ETIM 9.0	EC002999
ETIM 8.0	EC002999
ETIM 7.0	EC002999
ETIM 6.0	EC002999
ETIM 5.0	EC002999
UNSPSC 12.1	43211701

Details: OIT500-F113-B12-CB3

Function

The OIT500-* stationary read device is an optical identification system that works using industrial vision methods and is used in automated manufacturing processes. The ambient conditions in automobile construction in particular, for example the cyclical temperature changes, often make the use of read-only tags with electronic components difficult if not impossible. For the OIT high-temperature identification system, read-only tags of solid metal plates with a perforated matrix are used, which are designed for use at temperatures of up to 500 °C and suitable for high mechanical stress.

Simple installation and commissioning without complicated, time-consuming Teach-In processes enable rapid entry. Pluggable connections for the rapid exchange of devices and a controller with simple command set via the Ethernet interface guarantee simple operation. A scratch-resistant, replaceable quartz glass panel and sturdy metal housing make the OIT500-* a robust, efficient identification system.

Informative Literature: OIT500-F113-B12-CB3

Literature	Språk	Filtype	Filstørrelse
Application Report - Reliable Optical Identication in High-Temperature Environments	ENG	PDF	218 KB

Product Documentation: OIT500-F113-B12-CB3

Brief Instructions	Språk	Filtype	Filstørrelse
Instruction leaflet / Beipackzettel	ALL	PDF	420 KB
Manuals
Manual OIT500-F113-B12-CB3	ENG	PDF	4562 KB

Design / Simulation: OIT500-F113-B12-CB3

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	1608 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	79 KB

Approvals: OIT500-F113-B12-CB3

Declaration of Conformity	Sertifikatnummer	Språk	Filtype	Filstørrelse
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2494D	ALL	PDF	34 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6625	ALL	PDF	30 KB

Software: OIT500-F113-B12-CB3

Software Tools	Frigivelsesinfo	Filtype	Filstørrelse
Software Vision Configurator / Software Vision Configurator	V6.7.0	ZIP	65423 KB
VSX-Interface libraries for communication with VSX sensors / Libraries zur Kommunikation mit VSX-Sensoren	V6.0.02.4945	ZIP	18196 KB

Relaterte produkter: OIT500-F113-B12-CB3

Accessories

	V1S-G-10M-PVC Cable connector
	Male cordset single-ended M12 straight A-coded, 4-pin, PVC cable greyfa

	OIC-C10V2A-CB1-yyyyyy-zzzzzz Code carrier
	Code carrier for optical high-temperature identification system, stainless steelfa

	V8HAN-G-10M-PVC-ABG Female connector
	Female cordset, Harting, 8-pin, shielded, PVC cablefa

	V45-GP-10M-PUR-ABG-V45-G Connection cable, Ethernet
	Ethernet bus cable RJ45 to RJ45 PROFINET-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

	V45-GP Male connector, field-attachable
	Male connector RJ45 straight 4-pin, Cat5, shielded, field-attachable, insulation displacement connection, Outdoorfa

	V8HAN-G Female cordset, field attachable
	Female connector, Harting, 8-pin, field attachablefa

	OIZ-FG500 Replacement glass
	Replacement glass for series OIT300, OIT500 and OIT1500fa

	Vision Configurator Software
	Operating software for camera-based sensorsfa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Optical Identification Systems

From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.