Fabrika Otomasyonu
Proses Otomasyonu

RFID read/write device hazardous area IQH1-FP-C1D1

IQH1-FP-C1D1
  • Explosion-proof housing
  • Operating frequency 13.56 MHz
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • Connection via screw terminals
  • Approved for Class I, Groups C, D

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  IQH1-FP-C1D1

Ürün Açıklaması
HF read/write head, ISO 15693, for IDENTControl, hazardous areas
General specifications
Operating frequency13.56 MHz
Transfer rate26 kBit/s
Sensing range
Read distance0 ... 44 mm
Write distance0 ... 44 mm
Widthmax. 48 mm
UL File NumberE254700
MTBF340 a (Operation at +40 °C)
Indicators/operating means
LED green/yellowgreen: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Electrical specifications
Power consumption≤ 1.3 W
Supplyfrom the IDENTControl
Standard conformity
Electromagnetic compatibilityEN 301489-1
EN 301489-3
EN 300330
Degree of protectionEN 60529
SafetyEN 62368-1
RFIDISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3
Approvals and certificates
UL approvalClass I, Division 1, Groups C, D
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionNEMA Type 4, 7, 9
ConnectionTerminals
Material
Housingdiecast aluminum
Basediecast aluminum
Installation
Distance between two headsMultiplex on: ≥ 65 mm
Multiplex off: ≥ 115 mm
Massapprox. 4080 g
Dimensions
Height140 mm
Width157 mm
Length157 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IQH1-FP-C1D1

Design / Simulation: IQH1-FP-C1D1

Dil Seçeneği:
CADDilDosya TipiDosya Boyutu
CAD 2-D / CAD 2-DALLZIP1024 KB

Approvals: IQH1-FP-C1D1

Dil Seçeneği:
CertificatesSertifika No.DilDosya TipiDosya Boyutu
USA FCC ApprovalIREIQH1-FP-V1ALLPDF64 KB

İlişkili Ürünler: IQH1-FP-C1D1

Accessories
Control interface unit IDENTControl with PROFIBUS DP interfacefa
IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa
Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa
IDENTControl Compact RFID evaluation unit with interface for PROFIBUS DPfa
IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa
IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Endüstriyel Ethernet Arayüzüne ve REST API'ye Sahip RFID Okuma/Yazma Cihazı IUT-F190-B40

Orta algılama aralıkları için tasarlanan ve OT ve BT sistemlerine hızlı ve kolay bir şekilde entegre edilebilen yeni IUT-F190-B40'a göz atın …

RFID Hub'ı ziyaret edin

RFID için bir bilgi bankası niteliği taşıyan özel "RFID Hub" web sitemizi ziyaret edin. Sık sorulan sorulara yanıt alın ve tipik RFID uygulamaları hakkında bilgi edinin…