Vai al sito web globale
Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication
Interface for Power Rail, Used for redundant configuration, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication
35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chains
35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chains
3-pin screw terminal, For KF modules, Integrated Pt100 resistance thermometer for cold junction compensation, Packaging unit: 1 piece, blue
Interface for Power Rail, Used for redundant configuration, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication, Connection via spring terminals with push-in connection technology
Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication, Connection via spring terminals with push-in connection technology
35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chains
Isolated USB interface cable, Used with K-, E- and H-System devices, Used with PACTware
1-channel, Dry contact input, For line fault detection (LFD)
3-pin screw terminal, For KF modules, Integrated Pt100 resistance thermometer for cold junction compensation, Packaging unit: 1 piece, black
1-channel, KF module DIN rail isolation block, Snaps on to 35 mm DIN rail acc. to EN 60715, Easy panel mounting
Termination of DIN mounting rail, Suitable for Power Rail UPR-**-*, Suitable for profile rail K-DUCT
25-point wiring link for control cabinet modules with screw terminals
K-System place holder module, Housing width 20 mm, Marshalling for field and control side circuits, Configurable via plug-in jumpers, Two additional green terminal blocks supplied separately
1-channel, Loop powered, NAMUR sensor simulator and pulse generator, Simulates line faults
1-channel, Precision resistor, Conversion of 0 mA ... 20 mA/0 V ... 5 V
1-channel, Precision resistor, Conversion of 4 mA ... 20 mA/2 V ... 10 V
2-pin, For KC modules, Integrated Pt100 resistance thermometer for cold junction compensation, Packaging unit: 1 piece resistance thermometer, 1 piece terminal block, green
2-pin spring terminal with push-in connection technology, For KC modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 3 pieces green, 2 pieces blue
2-pin spring terminal with push-in connection technology, For KC modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces green
2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces green
2-pin screw terminal, For KC modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces green
K-System place holder module, Housing width 12.5 mm, Marshalling for field and control side circuits, Configurable via plug-in jumpers
K-System place holder module, Housing width 12.5 mm, Marshalling for field and control side circuits, Configurable via plug-in jumpers, Connection via spring terminals with push-in connection technology
Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pins
3-pin spring terminal with push-in connection technology, For KF modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 3 pieces green, 2 pieces blue
3-pin spring terminal with push-in connection technology, For KF modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces green
3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces green
3-pin screw terminal, For KF modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces green
K-System place holder module, Housing width 20 mm, Marshalling for field and control side circuits, Configurable via plug-in jumpers
Electrical insulation of segmented Power Rail inserts, Suitable for Power Rail UPR-**-*, Suitable for profile rail K-DUCT, Packaging unit: 10 pieces
2-pin, Fully insulated, For connectors with 5.0 mm or 5.08 mm pitch
34 / 34
Stai cercando ulteriori informazioni? Per saperne di più, consulta le nostre pagine correlate.
Leggi le ultime novità e applicazioni sui prodotti selezionati.