Serviceline Industriële Sensoren
Serviceline Explosiebeveiliging

Niet beschikbaar voor verkoop

This product has been replaced.Go to replacement product NRN35-L3-A2-C-V1
Niet beschikbaar voor verkoop
Niet beschikbaar voor verkoop

Inductive sensor NRN35-L2-A2-C-V1

NRN35-L2-A2-C-V1
  • 35 mm non-flush
  • Reduction factor = 1
  • Weld Immune

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:


Technische gegevens  NRN35-L2-A2-C-V1

General specifications
Switching functioncomplementary
Output typePNP
Rated operating distance35 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 28.35 mm
Reduction factor rAl approx. 1.1
Reduction factor rCu approx. 1.1
Reduction factor r304 approx. 1.1
Reduction factor rSt37 1
Output type4-wire
Nominal ratings
Operating voltage10 ... 36 V
Switching frequency0 ... 200 Hz
Hysteresis1 ... 15 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2.5 V
Operating current0 ... 250 mA
No-load supply current≤ 20 mA
Alternating magnetic field160 mT
Operating voltage indicatorLED, green
Switching state indicatorLED, yellow
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Housing materialPPE
Sensing facePPE
Degree of protectionIP67
Dimensions
Height40 mm
Width40 mm
Length55.5 mm

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NRN35-L2-A2-C-V1

Product Documentation: NRN35-L2-A2-C-V1

Taalkeuze:
Product informationTaalBestandstypeBestandsgrootte
Technical informationENGPDF158 KB

Design / Simulation: NRN35-L2-A2-C-V1

Taalkeuze:
CADTaalBestandstypeBestandsgrootte
CAD 3-D / CAD 3-DALLSTP215 KB

Aanverwante producten: NRN35-L2-A2-C-V1

Accessories

Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

Mounting aid for VariKont-Lfa
Modular mounting bracket fa

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont met Active Shielding Technology

De inductieve VariKont-sensoren met Active Shielding Technology bieden grote schakelafstanden, ongeacht de montageomstandigheden of omgevingsinvloeden. Haal voordeel uit vereenvoudigd installatieontwerp en beperkte kosten!

Inductive Safety Sensors SIL 2 PL d

Gezien de SIL 2-/PL d-geclassificeerde inductieve veiligheidssensoren geen dode zone hebben, kan de gegevensoverdracht worden gewaarborgd zonder handhaving van een minimumafstand tussen sensor en doel. Ontdek onze geoptimaliseerde portfolio voor zware industriële omgevingen.