Ikke tilgjengelig: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Ikke tilgjengelig: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Ikke tilgjengelig: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Ikke tilgjengelig: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Ikke tilgjengelig: 1-channel signal conditioner, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters, current and voltage sources, Current and voltage output, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 19 ... 90 V DC / 48 ... 253 V AC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current source, Signal: 0/4 ... 20 mA, Signal [2]: 0/2 ... 10 V, Signal: 1 x 0/4 ... 20 mA (current source), Signal [2]: 1 x 0/2 ... 10 Vpa
Ikke tilgjengelig: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Ikke tilgjengelig: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Ikke tilgjengelig: Diffuse sensor with measurement core technology, large housing design, background suppression and 3 more adjustable operating modes, IO-Link interface, 800 mm adjustable detection range, red light, 2 push-pull outputs, fixed cable, Cost-optimized series for standard tasks, Sensing-by-ranging functionality, IO-Link interface for service and process data, PowerBeam transmitter LED, Large adjustment range can be precisely definedfa
Se oversikt: The HART-Multiplexer-System from Pepperl+Fuchs enables communication between a PC and "smart" field devices supporting the HART protocol Existing plants can be modernized and extended easily by using the advantages of HART ... Se oversikt: The HART-Multiplexer-System from Pepperl+Fuchs enables communication between a PC and "smart" field devices supporting the HART protocol. Existing plants can be modernized and extended ea ...
Get an overview of Pepperl+Fuchs' broad portfolio of HMI systems for process industries ... hazardous areas. VisuNet RM Shell 6 VisuNet RM Shell 6 is the latest generation firmware for VisuNet Remote Monitors and Box Thin Clients from Pepperl+Fuchs. Using standard Ethernet technology , the software communicates with the process control system or ...
Se oversikt: The WCS position encoding system from Pepperl+Fuchs includes mechanical components for mounting the code rail ... flexibility, the WCS code rails can also be mounted in horizontal and vertical curves using our code rail holders. Aluminum profiles in combination with the WCS guiding trolley guarantee optimum positioning of read heads and also protect them from vibrations ...
Pepperl+Fuchs leverer smarte løsninger for industriell kommunikasjonsbaserte IIoT-applikasjoner i Ex-områder ... , the valve can be replaced by a technician using work order management. The technician can effectively schedule the installation into his route. An image documentation of the installation is created with the smartphone . Plant Expansion Plant Expansion ...
Whistleblower and complaint management: For Pepperl+Fuchs, acting in accordance with regulations, laws and our internal guidelines and codes of conduct is a matter of course ... „report number“ for each method of submitting information. Speak Up is available around the clock in a broad range of languages worldwide, so you can access your report at any time and view its current status using your report number. You can only view ...
Learn how Pepperl+Fuchs supports automated production of PEM electrolysis stacks for hydrogen generation ... water. In order to produce green hydrogen , water is split into hydrogen and oxygen molecules in an electrolysis process using electricity from renewable energies . This is done, for example, with proton exchange membranes (PEMs) . These are located in ...
Pepperl+Fuchs ultrasonic sensors enable web tension feedback in plastic thermoforming, metal stamping, and paper converting processes ... distance to the loop, or signal when defined limits are reached via two switching outputs . You can configure the control parameters quickly and easily using the programming buttons or parameterization software . The benefits There are certain cases where ...
During the manufacturing of battery modules for electric vehicles, several prismatic battery cells are welded together To do this, the cells must be positioned correctly The VOS 2-D universal vision ... data should also be fully documented. The Solution VOS5000 in C-Mount Version with External Bar Lighting With the VOS 2-D universal vision sensor, all tasks can be completed using a single device. In the C-mount version VOS5000 , the device can be ...
Enten det er på vei eller i terreng, må sensorer som brukes i mobilt utstyr, fungere pålitelig under tøffe forhold Pepperl+Fuchs tilbyr en bred portefølje av sensorløsninger for mobile maskiner ... ultralydgiversystem Med USi-sikkerheten kan ultralydgiverteknologi brukes i samsvar med kategori 3 PL d for første gang. Enten det er pålitelig forebygging av kollisjoner eller overvåking av et område, er USi-sikkerhetssystemet ideelt egnet for utfordrende utendørs ...
Reliability Made Smart: The new intrinsically safe 5G smartphone for hazardous areas ... message via Ethernet APL on the 5G Smart-Ex 03 smartphone. Using unique identifiers, they can check which component sent the error message and gain access to valuable data from the field device. A management system thereby enables asset management and ...
11-20/177Antall produkter pr. side:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.