Teknisk support Industrielle sensorer
Spør produktsakkyndige
Kundeservice, eksplosjonsbeskyttelse
Spør produktsakkyndige
Industrielle Sensorer

Inductive sensor NJ1,5-F-N-Y195694

NJ1,5-F-N-Y195694
  • Comfort series
  • 1.5 mm non-flush


NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datablad utdrag: Tekniske data for  NJ1,5-F-N-Y195694

General specifications
Switching functionNormally closed (NC)
Output typeNAMUR
Rated operating distance1.5 mm
Installationnon-flush
Assured operating distance0 ... 1.22 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.85
Output type2-wire
Nominal ratings
Nominal voltage8.2 V (Ri approx. 1 kΩ)
Switching frequency0 ... 5000 Hz
Hysteresistyp. %
Current consumption
Measuring plate not detectedmin. 3 mA
Measuring plate detected≤ 1 mA
Functional safety related parameters
MTTFd8734 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
IECEx approval
Equipment protection level GbIECEx PTB 11.0021X
Equipment protection level DaIECEx PTB 11.0021X
Equipment protection level MbIECEx PTB 11.0021X
ATEX approval
Equipment protection level GbPTB 00 ATEX 2032 X
Equipment protection level DaPTB 00 ATEX 2032 X
UL approvalcULus Listed, General Purpose
CML approvalon request
ANZEx19.3001X
Ambient conditions
Ambient temperaturecable in motion -5 ... 80 °C (23 ... 176 °F) , cable motionless -25 ... 80 °C (-13 ... 176 °F)
Mechanical specifications
Connection typecable
Housing materialPBT
Sensing facePBT
Degree of protectionIP68
Cable
Bending radius> 10 x cable diameter
MaterialPUR
Core cross section0.09 mm2
Length5 m
Mass36 g
Dimensions
Height10 mm
Width8 mm
Length8 mm
General information
Use in the hazardous areasee instruction manuals

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NJ1,5-F-N-Y195694

Documents: NJ1,5-F-N-Y195694

Instruction manualsFiltypeFilstørrelse
ИнструкцииPDF184 KB
Návod k poużitíPDF176 KB
Instruktions manualPDF175 KB
Instruction manualPDF177 KB
KasutusjuhendPDF171 KB
KäyttöohjePDF170 KB
Manuel d'instructionsPDF179 KB
BetriebsanleitungPDF177 KB
Οδηγίες χρήσηςPDF187 KB
HandleidingPDF176 KB
Instruction manual / BetriebsanleitungPDF175 KB
Használati útmutatóPDF179 KB
Manuale di istruzioniPDF177 KB
Lietošanas pamācībaPDF175 KB
Instrukciju vadovasPDF177 KB
Instrukcja obsługiPDF177 KB
Manual de instruçõesPDF179 KB
Manual de utilizarePDF179 KB
Návod na poużitiePDF177 KB
Navodila za uporaboPDF174 KB
Manual de instruccionesPDF178 KB
ManualPDF175 KB

CAD+CAE: NJ1,5-F-N-Y195694

EPLANFiltypeFilstørrelse
CAE EPLAN Data Portal / CAE EPLAN Data PortalLINK---
EPLAN macro EDZ / EPLAN Makro EDZEDZ61 KB

Approvals+Certificates: NJ1,5-F-N-Y195694

CertificatesFiltypeFilstørrelse
Australia Test SafePDF6749 KB
Canada USA UL Ordinary LocationPDF1806 KB
Canada USA UL Ordinary LocationPDF288 KB
EU PTB ATEX ia 2G, 1G, 1D s. certificatePDF12357 KB
Japan CML Ex iaPDF468 KB
Worldwide PTB IECEx iaLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF1308 KB
UK Declaration of Conformity (P+F)PDF1317 KB
Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

© 2024 Med enerett.

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.