Teknisk support Industrielle sensorer
Kundeservice, eksplosjonsbeskyttelse

Ikke tilgjengelig for salg

Dette produktet er erstattet med et annet.Gå til erstatningsprodukt NRB20-L3-A2-C-V1
Ikke tilgjengelig for salg
Ikke tilgjengelig for salg

Inductive sensor NRB20-L2-A2-C-V1

NRB20-L2-A2-C-V1
  • Reduction factor = 1
  • 20 mm flush
  • Weld Immune

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:


Datablad utdrag: Tekniske data for  NRB20-L2-A2-C-V1

General specifications
Switching functioncomplementary
Output typePNP
Rated operating distance20 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 16.2 mm
Reduction factor rAl approx. 1.1
Reduction factor rCu approx. 1.1
Reduction factor r304 approx. 1.1
Reduction factor rSt37 1
Output type4-wire
Nominal ratings
Operating voltage10 ... 36 V
Switching frequency0 ... 200 Hz
Hysteresis3 ... 15 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2.5 V
Operating current0 ... 250 mA
No-load supply current≤ 20 mA
Alternating magnetic field160 mT
Operating voltage indicatorLED, green
Switching state indicatorLED, yellow
Standard conformity
StandardsEN 60947-5-2
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Housing materialPPE
Sensing facePPE, PTFE coated
Degree of protectionIP67
Dimensions
Height40 mm
Width40 mm
Length55.5 mm

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NRB20-L2-A2-C-V1

Product Documentation: NRB20-L2-A2-C-V1

Velg språk:
Product informationSpråkFiltypeFilstørrelse
Technical informationENGPDF158 KB

Design / Simulation: NRB20-L2-A2-C-V1

Velg språk:
CADSpråkFiltypeFilstørrelse
CAD 3-D / CAD 3-DALLSTP215 KB

Approvals: NRB20-L2-A2-C-V1

Velg språk:
CertificatesSertifikatnummerSpråkFiltypeFilstørrelse
Canada USA CSA Ordinary Location1007121ALLPDF99 KB

Relaterte produkter: NRB20-L2-A2-C-V1

Accessories

Mounting aid for VariKont-Lfa

Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa
Modular mounting bracket fa

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.