Fabrika Otomasyonu
Proses Otomasyonu

Distance sensor OMT550-R201-UEP-IO-V1

OMT550-R201-UEP-IO-V1
  • Medium design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • IO-Link interface for service and process data
  • Analog output 0 ... 10 V DC

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  OMT550-R201-UEP-IO-V1

Ürün Açıklaması
Distance sensor
General specifications
Measurement range100 ... 550 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED
Light typemodulated visible red light
LED risk group labellingexempt group
Angle deviationmax. +/- 1.5 °
Diameter of the light spotapprox. 20 mm at a distance of 550 mm
Opening angle2.5 °
Ambient light limitEN 60947-5-2 : 45000 Lux
Resolution0.1 mm
Functional safety related parameters
MTTFd520 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Control elementsTeach-In key
Control elements5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage18 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 25 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
IO-Link revision1.1
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Device ID0x111913 (1120531)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time3 ms
Process data widthProcess data input 4 byte
Process data output 2 bits
SIO mode supportyes
Compatible master port typeA
Output
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
U—Pin2: analog output 0 ... 10 V
Signal output1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Response time2 ms , see table 1
Analog output
Output type1 voltage output: 0 ... 10 V
Load resistor> 1 kΩ voltage output ; ≤ 470 Ω current output
Recovery time2 ms
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Measurement accuracy
Temperature drift0.05 %/K
Warm up time5 min
Repeat accuracy≤ 1 % , see table 1
Linearity error0.75 %
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature10 ... 50 °C (50 ... 122 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protectionIP67 / IP69 / IP69K
Connection4-pin, M12 x 1 connector, 90° rotatable
Material
HousingPC (Polycarbonate)
Optical facePMMA
Massapprox. 37 g
Dimensions
Height61.7 mm
Width15 mm
Depth41.7 mm

Classifications

SystemClasscode
ECLASS 13.027270916
ECLASS 12.027270916
ECLASS 11.027270801
ECLASS 10.0.127270801
ECLASS 9.027270801
ECLASS 8.027270801
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: OMT550-R201-UEP-IO-V1

Function

The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design – from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks.

The entire series enables sensors to communicate via IO-Link.

The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor.

Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and can be adapted to the application environment.

Informative Literature: OMT550-R201-UEP-IO-V1

Dil Seçeneği:
LiteratureDilDosya TipiDosya Boyutu
Application Report - Cap FeedingENGPDF231 KB
Application Report - Precise Position Control for Robotic Gripping SystemsENGPDF285 KB
Application Report - Reliable Detecting Foil Tears in Battery Cell ManufacturingENGPDF163 KB
Product overview - R10x and R20x Series Photoelectric SensorsENGPDF2583 KB

Product Documentation: OMT550-R201-UEP-IO-V1

Dil Seçeneği:
Product informationDilDosya TipiDosya Boyutu
Installation and user instructions for offline parameterization of IO-Link sensorsENGPDF1788 KB

Design / Simulation: OMT550-R201-UEP-IO-V1

Dil Seçeneği:
CADDilDosya TipiDosya Boyutu
CAD 3-D / CAD 3-DALLSTP1583 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ71 KB

Approvals: OMT550-R201-UEP-IO-V1

Dil Seçeneği:
CertificatesSertifika No.DilDosya TipiDosya Boyutu
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
IO-Link Manufacturer DeclarationCERT-4527AALLPDF318 KB
Declaration of Conformity
Declaration of Conformity for simple apparatus / Konformitätserklärung für einfache BetriebsmittelDOC-3935AALLPDF308 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5594ALLPDF231 KB

Software: OMT550-R201-UEP-IO-V1

Dil Seçeneği:
Device Description Files/DriversSürüm BilgileriDosya TipiDosya Boyutu
IODD for OMT-AO-R201 series / IODD für OMT-AO-R201 SerieV1.00.002 / 2019-03-30ZIP925 KB
DTM for OMT/OQT R20x series / DTM für OMT/OQT R20x SerieV1.0.3.0 / 2021-01-18ZIP9622 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.006 / 2022-07-10ZIP96138 KB

İlişkili Ürünler: OMT550-R201-UEP-IO-V1

Accessories
Mounting bracket narrowfa
Mounting bracket narrowfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting bracket including adjustmentfa
Quick mounting accessoryfa
EtherNet/IP IO-Link master with 8 inputs/outputsfa
PROFINET IO IO-Link master with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Ethernet IO-Link module with 8 inputs/outputsfa
Ethernet IO-Link module with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa

Işık kesiti teknolojisi ile entegre LED'lere sahip 2-D görüntü sensörünün benzersiz bir bileşimi olan SmartRunner ışık kesiti sensörlerini keşfedin …

R2000, 360° boşluksuz, çepeçevre görünürlük ile güvenilir ve son derece hassas ölçüm sonuçları sağlar...

3D veya yüksek hızda ölçüm: R2300 serisi, her zorluğa yönelik doğru LiDAR sensörünü sunar. Avantajlar, teknoloji ve uygulama alanları hakkında daha fazla bilgi edinin...

R10x ve R20x serisi fotoelektrik sensörler

Aynı gövdelerde fotoelektrik fonksiyon prensipleri ve yenilikçi teknolojiler için tutarlı bir çözüm yelpazesi ilk defa karşınızda. Kullanıcılar, portföyün tamamında tek tip bir çalışma konseptinin avantajlarından yararlanır. R100, R101, R103, R200 ve R201 serisini keşfedin ...

Mesafe sensörleri, en son teknolojiler sayesinde en yüksek hassasiyet ve güvenilirlik seviyesi sunar...