Reading head, RS-485 interface, without RS-485 termination resistor, RS-485 interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Output of position and speedfa
Read head, RS-485 interface, with RS-485 termination resistor, RS-485 interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Output of position and speedfa
306 mm x 306 mm x 200 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
380 mm x 260 mm x 200 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
458 mm x 382 mm x 215 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
480 mm x 480 mm x 215 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
500 mm x 350 mm x 215 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
620 mm x 450 mm x 215 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
762 mm x 508 mm x 215 mm, 316L Stainless Steel, Ex e, Ex ia and Ex tb certified, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Straight Edge Sealing, No Gland Plate, Customizable configuration of terminals, cable entries and cable gland types as per specification, Explosion protection: Ex e, Enclosure: 1.5 mm AISI 316L, (1.4404) stainless steelpa
Indisponível para compra: For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 8, Number of channels per module: 2 , 4, Signal type: Universal, Manufacturer: Universal, Control system type: Universalpa
Indisponível para compra: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Indisponível para compra: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Indisponível para compra: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Indisponível para compra: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Indisponível para compra: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Indisponível para compra: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Indisponível para compra: Surge protection for 2 supply lines, Type 3 acc. to EN 61643-11, Nominal voltage 120 V AC, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 3 acc. to EN 61643-11:2013 class III acc. to IEC 61643-1:2011, Number of protected supply lines: 2pa
Indisponível para compra: Protection module for 1 supply line, Type 2 acc. to EN 61643-11, Exchange device for surge protection barrier M-LB-*.275*.D, Easy replacement of protection modules wihtout tools, High discharge capacity, Module can be exchanged under voltage (hot swap), Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa
Indisponível para compra: Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa
InterfacetechnologyfromPepperl+Fuchs,a leadingmanufacturerofinterfaces for hazardousareas, offers a widerangeofcomponentsandsolutions for applicationsinprocessíndustries ... , plantsandtheenvironment, as millionsofinstalleddevicesfromNorthSeaplatformstocleanroomapplicationsproof. LearnmoreaboutusageandbenefitsoftheK-SystemTheLatestInnovation: KCD2-SCS* Positionersareoftenequippedwithanalog ...
O sensorultrassônicoWILSENPepperl+Fuchsbaseado em LoRaWAN é uma soluçãorobusta para monitoramento de nível de enchimento e medição de distância ... sensata e adequada à aplicação e, por outro, a alcançar a maiorduraçãopossível da bateria. RSSInfoServiceStayinformedatanytimewhen a newfirmwareupdate for theWILSENsensorsisreleased: WithourRSSfeed , youwillreceiveanemail ...
A Pepperl+Fuchsoferece uma solução de sistemaIO-Link de ponta a ponta, que inclui uma variedade de sensoresIO-Link e infraestrutura ... ) As sériesmestreIO-LinkICE2 (EtherNet/IP) e ICE3 (PROFINET) com interfaceOPCUApermitem uma troca de informaçõesindependente de plataforma entre fornecedores em sistemashíbridos e baseados em nuvem. MestresIO-Link para aplicaçõesbaseadas em PLC (ICE1 ...
Visite o "Hub de segurançafuncional" da Pepperl+Fuchs, onde você encontrarádispositivosavaliadosquanto à segurança para aplicações de automação de fábricas e também poderá acessarferramentas e folhetosúteis ... de leitura2-D e fita de códigoDataMatrixmulticolorida . O firmwareintegradoverifica a plausibilidade dos valores de posiçãoXusandoLEDsvermelhos e azuis e, em seguida, os retransmite para o PLC de segurança. Módulo de interface AS CB10 ...
Acesse a visãogeral do amploportfólio de sistemas de HMI da Pepperl+Fuchs para indústrias de processamento ... de 4K a 60Hz. BPC3200 O BoxPCSeries3200oferece aos usuáriosgrandeflexibilidade. Os PCsBoxindustriaisvêm com processadorIntelCeleron e i5incorporado (KabyLake) de sétimageração. Eles também aceitam a mais recentetecnologia de armazenamento ...
1-5/922Itens por Página:
Não encontrou nenhum resultado?
Dica: Digite o caractere * antes do termo a ser pesquisado, modifique sua pesquisa, verifique os termos ou entre em contato conosco.