Thin Client Unit, Modular, lightweight design, Low-power design with minimal heat dissipation, VisuNet RM Shell installed, High connectivity flexibility due to multiple interface options, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canada, IP66pa
Thin Client Unit, Modular, lightweight design, Low-power design with minimal heat dissipation, VisuNet RM Shell installed, High connectivity flexibility due to multiple interface options, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canada, IP66pa
Compact design, Up to 1024 ppr, 4.75 V ... 30 V with short-circuit proof push-pull output, RS 422 functionality at 5 V operation, Enclosure type: 40 mm, Type of shaft: Hollow shaft, Interface: push-pull, incremental or RS-422, incremental, Detection type: photoelectric sampling, Output type: push-pull, incremental or RS-422, incrementalfa
Compact design housing ∅90 mm, 25 mm and 45 mm hollow shaft, Cost-effective, Short delivery times, Shaft mounting with threaded pins, Output type: push-pull, incremental or RS 422, incremental (see "Output circuit" in the ordering information)fa
Fieldbus Surge Protector, Trunk Installation on Power Hub
Pluggable, mounts between Power Hub and trunk cable, Intrinsically safe (Ex ia), FISCO, Entity, DART Fieldbus, or general-purpose, Optional diagnostics for wear, Grounding of shield direct, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa
Compact design, Up to 1024 ppr, 4.75 V ... 30 V with short-circuit proof push-pull output, RS 422 functionality at 5 V operation, Tangential cable outlet, Output type: push-pull, incremental or RS-422, incrementalfa
Compact design, Up to 1024 ppr, 4.75 V ... 30 V with short-circuit proof push-pull output, RS 422 functionality at 5 V operation, Tangential cable outlet, Output type: push-pull, incremental or RS-422, incrementalfa
Sturdy and compact design, Up to 1024 ppr, 4.75 V ... 30 V with short-circuit proof push-pull output, RS 422 functionality at 5 V operation, Output type: push-pull, incremental or RS-422, incrementalfa
Sturdy and compact design, Up to 1500 ppr, 4.75 V ... 30 V with short-circuit proof push-pull output, RS 422 functionality at 5 V operation, Output type: push-pull, incremental or RS-422, incrementalfa
Aankoop niet mogelijk: For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 8, Number of channels per module: 2 , 4, Signal type: Universal, Manufacturer: Universal, Control system type: Universalpa
Aankoop niet mogelijk: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Aankoop niet mogelijk: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Aankoop niet mogelijk: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Aankoop niet mogelijk: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Aankoop niet mogelijk: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Aankoop niet mogelijk: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Aankoop niet mogelijk: Surge protection for 2 supply lines, Type 3 acc. to EN 61643-11, Nominal voltage 120 V AC, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 3 acc. to EN 61643-11:2013 class III acc. to IEC 61643-1:2011, Number of protected supply lines: 2pa
Het nieuwe, vooruitstrevendeBebcoEPS® purge- en overdruksysteem werd ontwikkeld voor ClassI- of II/Div3- en Zone2/22-omgevingen Als manueel of automatischsysteem, beschikt het over alle vereistekenmerken voor een betrouwbarebescherming van de Ex-omgeving ... purgeandpressurizationsystem is asolutionthatenablesconventionalelectricalequipmenttobeused in hazardousareas. Devicesthatrequireprotectionareinstalled in anenclosurewithapressurethat is higherthanthat of thesurrounding ...
Een ontwikkelingsteam van zeven bedrijvenwerktmomenteel aan een nieuwegeneratie van AS-interface die prestaties tot een volledignieuwniveau zal optrekkenLeer meer over de kostenefficiëntiecommunicatietechnologie voor sensoren en actuators ... . 2EMC-bestendig Het robuusteAS-i-systeem is volledigbestand tegen elektromagnetischestoringen en vereist geen dureafscherming. 3VrijheidquanetwerktopologieGezienASi-5 geen dureschakelaars of actieveverdelersvereist, kunnen apparaten ...
TheNeoceptionAssetTracker is acloud-basedassetmanagementsystemandconsists of RFIDtechnologyfromPepperl+FuchscombinedwithagatewayandtheinnovativesoftwareservicesfromNeoception ... number of timesanassethascycledthroughtheprocess. Youwillreceivecustomizedalertsoncethepreconfiguredthresholdvaluehasbeenreachedsoinspectionandmaintenancecanbescheduledontime. Yourbenefit: youcanbuyNeoceptionsoftwareasa ...
De nieuwe5500-serie is de meest recentetoevoeging aan Pepperl+Fuchs' BebcoEPSassortimentbeproefdepurge- en overdruksystemen ... ExternemontageInternemontageExternemontageInternemontage5500SeriesonYouTube In thisYouTubevideo, ourProductPortfolioManagerChrisRomanogivesyouanintroductiontothe5500series. Heexplainsthedifferentmountingconcepts, technical ...
De ENA58IL-seriemagnetische, roterendeencoders maakt indruk met hogeresoluties en een nauwkeurigheid van <0,1° Ontdek de nieuwenorm voor roterendeencoders! ... wijze de positie en snelheid van de robotarm en zorgen ze voor een vlotlopendeprocesstroom. De uiterstrobuustemagnetischeencoderserie42H is berekend voor zwaarwerk en zorgtzelfs bij hevigeschokken of trillingen voor een nauwkeurigepositionering ...
1-5/1152Items per pagina:
Niet gevonden ?
Hint: plaats een * voor uw zoekwoord, verander uw zoekterm, controleer uw zoekterm op spellingsfouten, of neem contact met ons op.