Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
RLK28-8-H-700-IR-Z/31/116
| Descrição do Produto |
| Background suppression sensor |
| General specifications |
| Detection range | 20 ... 700 mm |
| Detection range min. | 20 ... 200 mm |
| Detection range max. | 20 ... 700 mm |
| Adjustment range | 200 ... 700 mm |
| Background suppression | max. + 10 % of the upper limit of the detection range |
| Light source | IRED |
| Light type | modulated infrared light , 880 nm |
| Black-white difference (6 %/90 %) | < 8 % |
| Diameter of the light spot | approx. 24 mm at a distance of 700 mm |
| Opening angle | transmitter 2°
receiver 2° |
| Ambient light limit | 50000 Lux |
| Functional safety related parameters |
| MTTFd | 620 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green |
| Function indicator | 2 LEDs yellow
ON: object inside the scanning range
OFF: object outside the scanning range |
| Control elements | Sensing range adjuster , Light-on/dark-on changeover switch |
| Electrical specifications |
| Operating voltage | 12 ... 240 V AC/DC |
| Power consumption | ≤ 3.5 VA |
| Output |
| Switching type | light/dark on, switchable (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.) |
| Signal output | Relay, 1 alternator |
| Switching voltage | max. 250 V AC/DC |
| Switching current | max. 2 A |
| Switching power | DC: max. 50 W AC: max. 500 VA |
| Switching frequency | 25 Hz |
| Response time | 20 ms |
| Timer function | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable
adjustment interval 0.1 ... 10 s |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| Protection class | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140.
Caution!
The protection class 2 is only valid when the terminal compartment is closed. |
| UL approval | E87056 , cULus Listed Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508.
|
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Ambient conditions |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | terminal compartment with 8 spring-loaded terminals for wire cross section 0.5 ... 1.5 mm2, insulation stripping 7.5 ... 8.5 mm, M16 x 1.5 cable gland |
| Material | |
| Housing | Plastic ABS |
| Optical face | Plastic pane |
| Mass | 112 g |
| Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 65.5 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270904 |
| ECLASS 10.0.1 | 27270904 |
| ECLASS 9.0 | 27270904 |
| ECLASS 8.0 | 27270904 |
| ECLASS 5.1 | 27270904 |
| ETIM 9.0 | EC002719 |
| ETIM 8.0 | EC002719 |
| ETIM 7.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| ETIM 5.0 | EC002719 |
| UNSPSC 12.1 | 39121528 |
Details:
RLK28-8-H-700-IR-Z/31/116
Product Documentation:
RLK28-8-H-700-IR-Z/31/116
Design / Simulation:
RLK28-8-H-700-IR-Z/31/116
Approvals:
RLK28-8-H-700-IR-Z/31/116
Produtos Relacionados:
RLK28-8-H-700-IR-Z/31/116
| Accessories |
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Mounting bracket: mounting aid for sensors in the RL* seriesfa |
|
|
|
|
| Mounting aid for RL* seriesfa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| Mounting bracket for rear wall mountingfa |
|
|
|
|
| Weld slag cover modelfa |
|
+55 11 4007 1448