Atendimento ao Cliente da Divisão de Sensores Industriais
Rede de Atendimento - Divisão de Proteção Contra Explosão

Thru-beam sensor (pair) LA31/LK31/31/115

LA31/LK31/31/115
  • Cost-optimized series for standard tasks
  • Large construction with small housing
  • Highly visible LED
  • Version for universal voltages
  • Relay output
  • Wide range of mounting options

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:


Folhas de dados: Dados técnicos do  LA31/LK31/31/115

Descrição do Produto
Thru-beam sensor, 30 m detection range, red light, dark on, AC/DC version, relais output, fixed cable
System components
EmitterLA31/115
ReceiverLK31/31/115
General specifications
Effective detection range0 ... 30 m
Threshold detection range43 m
Light sourceLED
Light typemodulated visible red light , 630 nm
Alignment aidLED yellow:
1. LED illuminates: Sufficient light signal received, emitter and receiver alignment is correct
2. LED flashes: Reaching switching point
3. LED off: Light beam is interrupted or the alignment is out
Diameter of the light spotapprox. 800 mm at a distance of 30 m
Opening angleEmitter: 0.5 ° , Receiver: 1.5 °
Ambient light limit50000 Lux ; according to EN 60947-5-2
Functional safety related parameters
MTTFd620 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green: power on
Function indicatorLED yellow:
1. LED lit constantly: signal > 2 x switching point (function reserve)
2. LED flashes: signal between 1 x switching point and 2 x switching point
3. LED off: signal < switching point
Electrical specifications
Operating voltage24 ... 240 V AC
12 ... 240 V DC
No-load supply currentEmitter: ≤ 20 mA
Receiver: ≤ 20 mA
Power consumptionEmitter: ≤ 1 VA
Receiver: ≤ 1 VA
Output
Switching typedark-on
Signal outputRelay, 1 alternator
Switching voltagemax. 250 V AC/DC
Switching currentmax. 3 A
Switching powerDC: max. 150 W AC: max. 750 VA
Switching frequency≤ 20 Hz
Response time≤ 25 ms
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
StandardsEN 62103
Approvals and certificates
Protection classII , rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-25 ... 55 °C (-13 ... 131 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protectionIP67
ConnectionEmitter: 2 m fixed cable , 2-wire
Receiver: 2 m fixed cable , 5-wire
Material
HousingPolycarbonate
Optical facePMMA
MassEmitter: 116 g
Receiver: 131 g
Dimensions
Height62 mm
Width18 mm
Depth35 mm

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: LA31/LK31/31/115

Product Documentation: LA31/LK31/31/115

Selecione o Idioma:
Brief InstructionsIdiomaTipo de ArquivoTamanho do Arquivo
Instruction leaflet / BeipackzettelALLPDF281 KB

Design / Simulation: LA31/LK31/31/115

Selecione o Idioma:
CADIdiomaTipo de ArquivoTamanho do Arquivo
CAD 3-D / CAD 3-DALLSTP288 KB
CAD Portal / CAD PortalALLLINK---

Approvals: LA31/LK31/31/115

Selecione o Idioma:
Declaration of ConformityNúmero do CertificadoIdiomaTipo de ArquivoTamanho do Arquivo
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0536AALLPDF129 KB

Produtos Relacionados: LA31/LK31/31/115

Accessories
Mounting bracket fa
Mounting bracket narrowfa
Mounting bracket narrowfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting bracket for mounting on flat surfaces with 2 M4 screwsfa
Stainless steel mounting bracket with adjustable half clamp on the sidefa
Sensores fotoelétricos das séries R10x e R20x

Pela primeira vez, estão disponíveis soluções consistentes dos princípios fotoelétricos funcionais e tecnologias inovadoras em estruturas idênticas. Os usuários se beneficiam de um conceito operacional uniforme em todo o portfólio. Confira as séries R100, R101, R103, R200 e R201...

Sensor fotoelétrico ML100

Seja vidro, wafers solares ou placas de circuito impresso: Os sensores fotoelétricos da série ML100 são precisamente adaptados para atender aos requisitos de várias tarefas complexas de detecção. Saiba mais sobre o portfólio ...