Servizio assistenza Sensori Industriali
Telefono: +39 039 69599 1
Fax.: +39 039 69599 30
Servizio assistenza Protezione contro le esplosioni
Telefono ++39 039 62921
Fax ++39 039 6292 390

Power Feed Module S1SD-2PF

S1SD-2PF
  • Interface for Power Bus
  • Supply current 3 A
  • LED status indication
  • Connection via screw terminals

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:


Estratto del Datasheet: Dati tecnici del  S1SD-2PF

Descrizione prodotto
Power feed module with screw terminals
Supply
ConnectionPower Bus or terminals 1-, 2+; 7+, 8-
Rated voltage16.8 ... 31.2 V DC
Fusing4 AT with back-up fuse
Power dissipation0.8 W
Output
ConnectionPower Bus
Output rated operating currentmax. 3 A
Indicators/settings
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Conformity
Degree of protectionIEC 60529:2001
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Core cross-section0.5 ... 2.5 mm2 (20 ... 14 AWG)
Massapprox. 70 g
Dimensions6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
CertificateDEMKO 16 ATEX 1750X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approvalE106378
IECEx approvalIECEx UL 16.0116X
Approved forEx nA IIC T4 Gc
Accessories
Optional accessoriesPower Bus POWERBUS-SETL5.***
Power Bus POWERBUS-SETH5.***
cover for DIN mounting rail POWERBUS-COV.250
end cap POWERBUS-CAP

Documents: S1SD-2PF

ManualsLinguaFile tipoDimensioni
ManualENGPDF2762 KB
HandbuchGERPDF2771 KB
Instruction manuals
ИнструкцииBULPDF0 KB
Návod k poużitíCZEPDF132 KB
Instruktions manualDANPDF0 KB
Instruction manualENGPDF136 KB
KasutusjuhendESTPDF127 KB
KäyttöohjeFINPDF127 KB
Manuel d'instructionsFRAPDF138 KB
BetriebsanleitungGERPDF137 KB
Οδηγίες χρήσηςGREPDF141 KB
HandleidingHOLPDF0 KB
Instruction manual / BetriebsanleitungHRVPDF130 KB
Használati útmutatóHUNPDF133 KB
Manuale di istruzioniITAPDF135 KB
Lietošanas pamācībaLAVPDF131 KB
Instrukciju vadovasLITPDF0 KB
Instrukcja obsługiPOLPDF134 KB
Manual de instruçõesPORPDF132 KB
Manual de utilizareRONPDF0 KB
Návod na poużitieSLKPDF131 KB
Navodila za uporaboSLVPDF130 KB
Manual de instruccionesSPAPDF137 KB
ManualSWEPDF129 KB
Product information
Product Overview SC-SystemENGPDF456 KB
Product Overview SC-SystemGERPDF488 KB

Approvals+Certificates: S1SD-2PF

Statements of complianceCertificato NumeroFile tipoDimensioni
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0534CPDF317 KB
Certificates
Canada UL cULE106378 cUL (QUZW7)LINK---
Europe DEMKO ATEX Category 3 GDEMKO 16 ATEX 1750XPDF1876 KB
UL Non-Sparking nA IECEx Certificate of ConformityIECEx UL 16.0116XLINK---
USA ULE106378 UL (QUZW)LINK---

Prodotti associati : S1SD-2PF

Accessory of
1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Input current and voltage sources, Dual output 0/4 mA ... 20 mA, 0/1 V ... 5 V or 0/2 V ... 10 V, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar millivolt sources, Output bipolar current and voltage sources, Accuracy 0.1 %, Configurable via DIP switches and potentiometer, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Output bipolar current and voltage sources, Accuracy 0.1 %, Configurable via DIP switches and potentiometer, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire and 3-wire transmitters and 2-wire current sources, Current and voltage output, Accuracy 0.1 %, Configurable by DIP switches, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Dual output 0/4 mA ... 20 mA, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input current and voltage sources, Current and voltage output, Accuracy 0.1 %, Configurable by DIP switches, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Relay contact output, Accuracy 0.1 %, Restart inhibit, One-shot function, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, Field side loop powered, Current input/output 0/4 mA ... 20 mA, Accuracy 0.1 %, Reverse polarity protection, Connection via screw terminalspa
2-channel signal conditioner, Field side loop powered, Current input/output 0/4 mA ... 20 mA, Accuracy 0.1 %, Reverse polarity protection, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Thermocouple, RTD, potentiometer or mV input, Input for PTC thermistor, Current and voltage output, Line fault (LFD) and sensor burnout detection, Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors or AC/DC voltage sources, Relay contact output, Timer function, Configurable by DIP switches, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire and 3-wire SMART transmitters and current sources, Output 0/4 mA ... 20 mA, Accuracy 0.1 %, Connection via screw terminalspa
Accessories
Bus carrier with bus PCB for 35 mm DIN mounting rail, height 7.5 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa
Bus carrier with bus PCB for 35 mm DIN mounting rail, height 15 mm, Provides DC supply voltage and the bus connection to all equipped SC-System modules, Standard length 250 mm (9.84 inch), simple to customize to application space, Eliminates daisy-chainspa
Cover for DIN mounting rail, Suitable for Power Bus, Standard length 250 mm (9.84 inch), simple to customize to application space, Packaging unit: 5 piecespa
Fixing of the bus carrier with bus PCB in the DIN mounting rail, Termination of DIN mounting rail, Suitable for Power Bus, Packaging unit: 5 pieces left, 5 pieces rightpa
Nuova gamma di condizionatori di segnale Sistema SC

Scoprite la soluzione compatta più versatile!