Valve Coupler FD0-VC-EX4.PA
- For four intrinsically safe valves with position sensors
- Installation in Zone 1 and Zone 2
- Valves in Zone 0
- Connection to fieldbus acc. to FISCO or Entity
- For PROFIBUS PA
- PCS integration with FDT/DTM technology
- Monitors lead breakage and short circuits
- Valve monitoring and diagnostics integrated
- Conducts partial stroke testing
- Conforms to PROFIBUS PA profile
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Folhas de dados: Dados técnicos do FD0-VC-EX4.PA
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Fieldbus connection | ||
| PROFIBUS PA | ||
| Connection | Connection +, - | |
| Rated voltage | 9 ... 32 V | |
| Rated current | max. 23 mA | |
| Baud rate | 31.25 kBit/s | |
| Protocol | IEC 61158-2 | |
| Terminal "S" | only for the connection of the cable screen (BUS) and/or the potential compensation | |
| Terminal "PA" | only for the connection of the cable screen (sensor interface) and/or grounding | |
| Grounding plate | only for the connection of the potential compensation | |
| Field circuit | ||
| Inputs | ||
| Connection | 8, for binary sensors: terminals 3, 4, 7, 8, 11, 12, 15, 16 | |
| Sensor supply voltage | 5 V | |
| Sensor supply current | 5 mA | |
| Time delay before availability | 2 ms | |
| Max. cycle time | max. 160 ms | |
| Outputs | ||
| Connection | terminals 1+, 2-; 5+, 6-; 9+, 10-; 13+, 14- | |
| Output voltage | 6.4 ... 7.9 V | |
| Output rated operating current | 1.5 mA | |
| Holding current | 1 mA | |
| Galvanic isolation | ||
| PROFIBUS PA/Field circuit | safe galvanic isolation acc. to EN 60079-11, voltage peak value 60 V | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Galvanic isolation | EN 60079-11 | |
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC/EN 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Core cross section | Bus cable: Cable sensors/valve: |
|
| Housing | 187 mm x 129 mm x 46 mm | |
| Degree of protection | IP65 | |
| Installation position | Cable glands downwards | |
| Mass | approx. 290 g | |
| Mounting | wall mounting | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 98 ATEX 2210 | |
| Marking |  II 2G (1) Ex ia [ia Ga] IIC T4 Gb , II (1D) [Ex ia Da] IIIC , II 3G Ex ic IIC T4 Gc , II (3D) [Ex ic Dc] IIIC |
|
| PROFIBUS PA | ||
| Voltage | 24 V | |
| Current | 380 mA | |
| Power | 5.32 W | |
| Rated voltage | 9 ... 32 V | |
| Rated current | 23 mA | |
| FDE (Fault Disconnect Equipment) | 6.7 mA | |
| Terminal "S" | only for the connection of the cable screen (BUS) and/or the potential compensation | |
| Terminal "PA" | only for the connection of the cable screen (sensor interface) and/or grounding | |
| Grounding plate | only for the connection of the potential compensation | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 | |
| International approvals | ||
| IECEx approval | IECEx TUN 04.0002 | |
| Approved for | Ex ia [ia Ga] IIC T4 Gb , [Ex ia Da] IIIC , Ex ic IIC T4 Gc , [Ex ic Dc] IIIC |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242610 |
| ECLASS 12.0 | 27242610 |
| ECLASS 11.0 | 27242610 |
| ECLASS 10.0.1 | 27242610 |
| ECLASS 9.0 | 27242610 |
| ECLASS 8.0 | 27242610 |
| ECLASS 5.1 | 27242610 |
| ETIM 9.0 | EC001601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: FD0-VC-EX4.PA
Datasheet: FD0-VC-EX4.PA
| Datasheet | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Datasheet FD0-VC-EX4.PA | 1730 KB | |
| Datenblatt FD0-VC-EX4.PA | 1716 KB |
Documents: FD0-VC-EX4.PA
| Manuals | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Manual FD0-VC-Ex4.PA | 956 KB | |
| Handbuch FD0-VC-Ex4.PA | 995 KB | |
| Technical information | ||
| Planning and integration: Compatibility list of sensors and pilot valves | 50 KB | |
| Planung und Integration: Kompatibilitätsliste von NAMUR Sensoren und Pilotventilen | 49 KB | |
| Application reports | ||
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | 470 KB | |
| Applikationsbericht - Digitale Kommunikation in der Produktion von Grobblechen | 473 KB | |
| Applikationsbericht - Steuerung und Überwachung der Kälteanlagen im Deutschen Elektronen-Synchrotron | 643 KB | |
| Documents | ||
| Release Information FD0-VC-Ex4.PA DTM | 406 KB | |
| Release information DD/GSD files | 325 KB |
Approvals+Certificates: FD0-VC-EX4.PA
| Certificates | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Europe PTB II 2 G (1) II (1D) II (3D) II 3 G ATEX | 1378 KB | |
| TUV Nord IECEx Certificate of Conformity | LINK | --- |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 88 KB |
Software: FD0-VC-EX4.PA
| Device Driver | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Device Driver / Gerätetreiber | ZIP | 259 KB |
| GSD / GSD | ZIP | 4 KB |
| Software Tools | ||
| FD0-VC-Ex4.PA DTM / FD0-VC-Ex4.PA DTM | ZIP | 20003 KB |
O Ethernet-APL permite a comunicação contínua em todos os níveis de hierarquia. Saiba mais sobre essa tecnologia pioneira...
Serviço de informações RSS sobre atualizações do PANOS
Seja informado(a) quando uma nova atualização do software PANOS, o sistema operacional dos comutadores Ethernet-APL, for lançada: Com nosso feed RSS, você receberá uma notificação por e-mail na sua caixa de entrada imediatamente após o lançamento de uma atualização.
Da decisão ao planejamento, da instalação ao comissionamento e da operação a manutenção: Saiba como aproveitar ao máximo a sua infraestrutura fieldbus!
Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
+55 11 4007 1448
A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.