Servizio assistenza Sensori Industriali
Telefono: +39 039 69599 1
Fax.: +39 039 69599 30
Servizio assistenza Protezione contro le esplosioni
Telefono ++39 039 62921
Fax ++39 039 6292 390

Thru-beam sensor (pair) OBE10M-18GF60-S2PP-0,3M-V1-IR

  • Sensing range 10 m
  • With increased sealing, degree of protection IP68
  • Integrated circuit
  • Narrow opening angle, suitable for mounting in pairs
  • Not sensitive to ambient light
  • DC voltage version
  • Test input
  • Reverse polarity protection
  • Short-circuit protected
  • Switching status indicator, yellow LED

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del  OBE10M-18GF60-S2PP-0,3M-V1-IR

Descrizione prodotto
Thru-beam sensor, M18 threaded housing design, plastic housing, 10 m detection range, infrared light, light/dark on, DC version, 2 push-pull outputs, fixed cable with M12 plug
System components
General specifications
Effective detection range0 ... 10 m
Threshold detection range12 m
Light sourceIRED
Light typemodulated infrared light , 850 nm
Diameter of the light spotapprox. 1500 mm at a distance of 10 m
Opening angleEmitter: ± 5 ° ; Receiver: ± 10 °
Optical facefrontal
Ambient light limit10000 Lux
Accessories providedMounting nuts
Functional safety related parameters
MTTFd606 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorEmitter: LED green: Power on
Function indicatorReceiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply currentEmitter: ≤ 17 mA
Receiver: ≤ 13 mA
Protection classClass III
Test inputemitter deactivation at 0 V
Switching typeQ - Pin4: NPN normally open / dark-on, PNP normally closed / light-on
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Switching frequency80 Hz
Response time6 ms
Product standardEN 60947-5-2
Approvals and certificates
CE conformityCE
UKCA conformityUKCA
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Relative humidity90 % , noncondensing
Mechanical specifications
Degree of protectionIP67 / IP68
Connectionfixed cable with 4-pin, M12 x 1 connector
Emitter: black ; Receiver: grey
HousingPC , black
Optical facePlastic pane
Length0.3 m
Massapprox. 25 g per device
Length59 mm
Diameter18 mm
Thread sizeM18


ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: OBE10M-18GF60-S2PP-0,3M-V1-IR

Approvals: OBE10M-18GF60-S2PP-0,3M-V1-IR

Language Selection:
CertificatesCertificato NumeroLinguaFile tipoDimensioni
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)TDOC-6980AITAITAPDF217 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6981ALLPDF222 KB
UK Declaration of Conformity (P+F)TDOC-6981AENGENGPDF195 KB

Prodotti associati : OBE10M-18GF60-S2PP-0,3M-V1-IR


Mounting brackets for sensorsfa
Mounting Bracket with swivel nutfa
Mounting Bracket with swivel nutfa
Sensori fotoelettrici serie R10x e R20x

Per la prima volta, una vasta gamma di sensori fotoelettrici e tecnologie innovative si incontrano in un design di custodie standardizzato. Gli utenti beneficiano di un concetto operativo uniforme in tutta la gamma. Scopri le serie R100, R101, R103, R200 e R201...

Sensore fotoelettrico ML100

Che si tratti di vetro, wafer solari o schede a circuito stampato: I sensori fotoelettrici della serie ML100 sono realizzati su misura per soddisfare i requisiti di varie attività di rilevamento complesse. Maggiori informazioni sulla gamma...