Thru-beam sensor LD28/LV28-F1-3974/47/82b/112
- Ultra bright LEDs for power on, weak signal indication and switching state
- Highly visible LED as alignment aid in receiver optics
- Emitter deactivation
- Not sensitive to ambient light, even with switched energy saving lamps
- Extra vibration proof version
- Waterproof, degree of protection IP67
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del LD28/LV28-F1-3974/47/82b/112
| Descrizione prodotto |
|---|
| Universal thru-beam sensor, large housing design, 30 m detection range, red light, 25 kHz transmission frequency, light/dark on, DC version, 2 PNP outputs, test input, pre-fault output, M12 plug |
| System components | ||
|---|---|---|
| Emitter | LD28-F1-3974/76a/112 | |
| Receiver | LV28-F1-3974/47/82b/112 | |
| General specifications | ||
| Effective detection range | 0 ... 30 m | |
| Threshold detection range | 40 m | |
| Light source | LED | |
| Light type | modulated visible red light , 660 nm | |
| Alignment aid | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
|
| Transmitter frequency | F1 = 25 kHz | |
| Diameter of the light spot | approx. 0.6 m at 30 m | |
| Opening angle | Emitter 1.2°, Receiver 5° |
|
| Ambient light limit | 50000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 620 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow: 1. LED lit constantly: signal > 2 x switching point (function reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point |
|
| Control elements | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | Emitter: ≤ 50 mA Receiver: ≤ 35 mA |
|
| Input | ||
| Test input | emitter deactivation at +UB (Imax. < 3 mA at 30 V DC) | |
| Output | ||
| Stability alarm output | 1 PNP transistor, short-circuit protected, protected from reverse polarity, open collector, Umax = 30 V DC, Imax = 0.2 A The output becomes inactive if the signal level has fallen below the function reserve for approx. 10 s (yellow and red LEDs flash). If the light beam is interrupted four times during this period, the output immediately becomes inactive. |
|
| Switching type | light/dark on switchable | |
| Signal output | 2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 200 mA | |
| Switching frequency | 1000 Hz | |
| Response time | 0.5 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | cULus | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | Metal connector, M12, 5-pin, 90° rotatable | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | Plastic pane | |
| Mass | 140 g (emitter and receiver) | |
| Dimensions | ||
| Height | 88 mm | |
| Width | 25.8 mm | |
| Depth | 65.5 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: LD28/LV28-F1-3974/47/82b/112
Product Documentation: LD28/LV28-F1-3974/47/82b/112
| Brief Instructions | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 470 KB |
Design / Simulation: LD28/LV28-F1-3974/47/82b/112
| CAD | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1492 KB |
| CAD 3-D additional / CAD 3-D additional | ALL | STP | 1643 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: LD28/LV28-F1-3974/47/82b/112
| Certificates | Certificato Numero | Lingua | File tipo | Dimensioni |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2135B | ALL | 309 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5629 | ALL | 229 KB | |
Prodotti associati : LD28/LV28-F1-3974/47/82b/112
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Per la prima volta, una vasta gamma di sensori fotoelettrici e tecnologie innovative si incontrano in un design di custodie standardizzato. Gli utenti beneficiano di un concetto operativo uniforme in tutta la gamma. Scopri le serie R100, R101, R103, R200 e R201...
Che si tratti di vetro, wafer solari o schede a circuito stampato: I sensori fotoelettrici della serie ML100 sono realizzati su misura per soddisfare i requisiti di varie attività di rilevamento complesse. Maggiori informazioni sulla gamma...
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.