Ultrasonic sensor UCC2500-50GK-B26-0,15M-Y
- Thread M50
- PTFE coated transducer
- Physical LIN interface
- Temperature compensation
- Resolution 16 Bit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del UCC2500-50GK-B26-0,15M-Y
| Descrizione prodotto |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 150 ... 2500 mm | |
| Dead band | 0 ... 150 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 120 kHz | |
| Electrical specifications | ||
| Operating voltage | 8 ... 18 V DC , ripple 10 %SS | |
| No-load supply current | ≤ 20 mA at 12 V DC |
|
| Power consumption | ≤ 250 mW in the measurement operating mode | |
| Time delay before availability | ≤ 70 ms | |
| Interface | ||
| Interface type | Physical LIN interface | |
| Transfer rate | 19.2 kBit/s (8N1) | |
| Cycle time | 55 ms | |
| Output | ||
| Resolution | 2 mm | |
| Repeat accuracy | ≤ 0.1 % of full-scale value | |
| Temperature influence | 3 % of full-scale value over the entire temperature range | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection. |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | fixed cable with plug | |
| Degree of protection | IP66 / IP67 ( connector excluded ) | |
| Material | ||
| Housing | PBT | |
| Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated | |
| Connector | ||
| Type | JST connector: PHR-3 | |
| Number of pins | 3 | |
| Cable | ||
| Cable diameter | 3 x 0.25 mm2 | |
| Material | PVC | |
| Length | 150 mm | |
| Mass | 100 g | |
| Dimensions | ||
| Height | 37 mm | |
| Width | 50 mm | |
| Length | 50 mm | |
| Factory settings | ||
| Output | Temperature compensation Address setting 7 |
|
| General information | ||
| Scope of delivery | 1 Nut plastic | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UCC2500-50GK-B26-0,15M-Y
Il sistema di sensori a ultrasuoni di sicurezza USi sta rivoluzionando le applicazioni di sicurezza, sia in ambienti difficili o polverosi sia all'aperto.
Pepperl+Fuchs offre vari documenti scaricabili contenenti informazioni dettagliate sui sensori ad ultrasuoni.
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.