AS-Interface sensor module VAA-4E-G2-ZA

AS-Interface certificate
Degree of protection IP67
Addressing jack
Flat cable connection with cable piercing technique, variable flat cable guide
Inputs for 2- and 3-wire sensors
Power supply of inputs from the module
Function display for bus and inputs
Monitoring of sensor overloads

Technical Data
Product Documentation
Design / Simulation
Approvals
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del VAA-4E-G2-ZA

Descrizione prodotto
G2 flat module 4 inputs (PNP)

General specifications
Node type		Standard node
AS-Interface specification		V3.0
Required gateway specification		≥ V2.0
UL File Number		E223772
Indicators/operating means
LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply
LED PWR		AS-Interface voltage; LED green
LED IN		switching state (input); 4 LED yellow
Electrical specifications
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 40 mA (without sensors) / max. 240 mA
Protection class		III
Surge protection		U_e: Over voltage category III, safe isolated power supplies (PELV)
Input
Number/Type		4 inputs for 2- or 3-wire sensors (PNP), DC
Supply		from AS-Interface
Voltage		21 ... 31 V
Current loading capacity		≤ 200 mA (T_B ≤ 40 °C), ≤ 150 mA (T_B ≤ 60 °C), short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point
	0 (unattenuated)	≤ 1.5 mA
	1 (attenuated)	≥ 4.5 mA
Signal delay		< 2 ms (input/AS-Interface)
Signal frequency		≤ 250 Hz
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001
Standard conformity
Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Input		EN 61131-2:2007
Emitted interference		EN 61000-6-4:2001
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2001
Programming instructions
Profile		S-0.1
IO code		0
ID code		1
ID1 code		F
ID2 code		F
Data bits (function via AS-Interface)		InputOutput
	D0	IN1 -
	D1	IN2 -
	D2	IN3 -
	D3	IN4 -
Parameter bits (programmable via AS-i)		function
	P0	Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (default settings)
	P1	Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings)
	P2	Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings)
	P3	not used
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		85 % , noncondensing
Climatic conditions		For indoor use only
Altitude		≤ 2000 m above MSL
Pollution degree		3
Mechanical specifications
Degree of protection		IP67
Connection		cable piercing method flat cable yellow inputs: M12 round connector
Material
	Housing	PBT
Mass		100 g
Tightening torque, cable gland		0.4 Nm
Mounting		Mounting plate

Classifications

System	Classcode
ECLASS 13.0	27242604
ECLASS 12.0	27242604
ECLASS 11.0	27242604
ECLASS 10.0.1	27242604
ECLASS 9.0	27242604
ECLASS 8.0	27242604
ECLASS 5.1	27242604
ETIM 9.0	EC001599
ETIM 8.0	EC001599
ETIM 7.0	EC001599
ETIM 6.0	EC001599
ETIM 5.0	EC001599
UNSPSC 12.1	39121535

Details: VAA-4E-G2-ZA

Product Documentation: VAA-4E-G2-ZA

Brief Instructions	Lingua	File tipo	Dimensioni
Instruction leaflet / Beipackzettel	ALL	PDF	188 KB

Design / Simulation: VAA-4E-G2-ZA

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	149 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: VAA-4E-G2-ZA

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
US CA UL	E223772	ALL	LINK	---
Worldwide AS-International Association AS-Interface	34101	ALL	PDF	608 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1018C	ALL	PDF	118 KB

Prodotti associati : VAA-4E-G2-ZA

Matching System Components

	U-G3FF AS-Interface module mounting base
	AS-Interface module mounting base for connection to flat cable (AS-Interface and external auxiliary power)fa

Accessories

	VAZ-PK-1,5M-V1-G Adapter cable module/hand-held programming device
	Adapter cable module/hand-held programming devicefa

Informazione generale sul prodotto

Download gratuito: White paper sui protocolli di comunicazione basati su TCP (PDF)

Questo white paper gratuito in formato PDF confronta i diversi protocolli di comunicazione basati su TCP (AMQP, OPC UA, MQTT, REST API) che si sono fatti strada fino a diventare indispensabili per IIoT e Industry 4.0. Scaricalo ora gratuitamente!

Modulo per quadri elettrici KE5 con AS-Interface – Semplicità di gestione e migliore maneggevolezza

L'esclusivo design della custodia del nuovo modulo per quadri elettrici KE5 consente una buona visibilità e semplifica le operazioni di montaggio, cablaggio e manutenzione all'interno di quadri elettrici e scatole di derivazione.

Scarica la Panoramica dei prodotti AS-Interface

Cogli l’opportunità per conoscere la gamma completa dei prodotti AS-Interface.

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.