Wsparcie Czujników Przemysłowych
Wsparcie Ochrony przed wybuchem

HART Termination Board HiSHPTB/32/FOX2001C-02

HiSHPTB/32/FOX2001C-02
  • IA 200 replacement FTA
  • Designed for FBMs 201, 204, 215 and 237
  • 25-pin Sub-D connectors, PCS wiring
  • Redundant power supply connections
  • Easy to add line impedance

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:


Dane techniczne  HiSHPTB/32/FOX2001C-02

Supply
Rated voltage20 ... 30 V DC
Fusing315 mA , 5 x 20 mm (0.2 x 0.8 inch)
Power dissipation0.7 W , with Multiplexer
Reverse polarity protectionyes
HART signal channels (intrinsically safe)
HART signal channels
Number of channels32 unbalanced signal loops
Redundancy
Supplyyes
Galvanic isolation
HART signal channels30 V DC
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Relative humidity5 ... 90 %, non-condensing
Mechanical specifications
Core cross section2.5 mm2 (16 AWG)
Connectionfield side: 2 x 37-pin Sub-D socket
control side: 4 x 26-pin connectors
RS 485 interface: removable screw terminals
power: removable screw terminals
Massapprox. 500 g
Dimensions260 x 120 x 190 mm (10.2 x 4.7 x 7.5 inch) (W x H x D) , depth including module assembly with HiDMux2700
Height120 mm
Width260 mm
Depth190 mm
MountingDIN rail mounting
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210190
ECLASS 12.027210190
ECLASS 11.027210190
ECLASS 10.0.127210190
ECLASS 9.027210190
ECLASS 8.027210190
ECLASS 5.127242690
ETIM 9.0EC001485
ETIM 8.0EC001485
ETIM 7.0EC001485
ETIM 6.0EC001485
ETIM 5.0EC001485
UNSPSC 12.139121008

Details: HiSHPTB/32/FOX2001C-02

Function

The Termination Board is designed for easy HiDMux2700 Multiplexer integration with Foxboro IA 200 series controller.

With the Multiplexer integrated into the board and plug-n-play options for the DCS equipment, this provides a clean and clear access to the HART signals, while reducing the need for marshalling cabinets and extra equipment that reduce cabinet space.

The HART Termination Board provides a robust solution for on-line HART communications, interfaces up to 32 field located HART devices, and, it allows the user to replace standard DCS field termination panels.

Product Documentation: HiSHPTB/32/FOX2001C-02

Language Selection:
ManualsJęzykTyp plikuRozmiar pliku
Manual DTM description HiDMux2700ENGPDF2278 KB
Manual HiDMux2700ENGPDF8581 KB

Approvals: HiSHPTB/32/FOX2001C-02

Language Selection:
Declaration of ConformityNr. certyfikatuJęzykTyp plikuRozmiar pliku
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-B046CALLPDF41 KB
UKCA-Declaration of conformity / UKCA-KonformitätserklärungDOC-B0G2ALLPDF39 KB

Produkty powiązane: HiSHPTB/32/FOX2001C-02

Accessory of

32-channel, 24 V DC supply, HART field device input (revision 5 to 7), RS-485 interface, Up to SIL 3 acc. to IEC/EN 61508pa