Ultrasonic sensor UMB800-18H40-E5-2M-Y
- Front of transducer and housing manufactured entirely from stainless steel
- Degree of protection IP68 / IP69K
- Short version: 55 mm
- Mounting bracket MH-18H-01 included in delivery
- Program input
- Temperature compensation
- Customer-specific configuration
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne UMB800-18H40-E5-2M-Y
| Opis produktu |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 70 ... 800 mm | |
| Adjustment range | 90 ... 800 mm | |
| Dead band | 0 ... 70 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 170 kHz | |
| Response delay | approx. 100 ms | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | ≤ 15 mA | |
| Input | ||
| Input type | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
|
| Output | ||
| Output type | 1 switching output E5, PNP NO/NC, programmable | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V | |
| Repeat accuracy | ± 0.5 % of full-scale value | |
| Switching frequency | ≤ 4 Hz | |
| Range hysteresis | 1 % of the set operating distance | |
| Temperature influence | ± 1.5 % of full-scale value | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
|
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m , Polyether based | |
| Core cross section | 4 x 0.19 mm2 | |
| Degree of protection | IP68 / IP69K | |
| Material | ||
| Housing | Stainless steel 1.4404 / AISI 316L | |
| Transducer | Stainless steel 1.4435 / AISI 316L | |
| Seal | Cable seal : TPU , Elastollan 1185 A10 (FDA) | |
| Mass | 90 g | |
| Dimensions | ||
| Length | 55 mm | |
| Diameter | 18 mm | |
| Factory settings | ||
| Output | Switch point A1: 90 mm Switch point A2: 800 mm Output mode: Window mode Output logic: normally open |
|
| Beam width | medium sound lobe | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UMB800-18H40-E5-2M-Y
Function
The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. Therefore the sensor is suitable for all applications where a very high tightness is required. Since the sensor housing is made exclusively of V4A stainless steel and all seals are made of highly chemical-resistant materials, this sensor is also predestined for use in chemically aggressive environments.
For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used.
Informative Literature: UMB800-18H40-E5-2M-Y
| Literature | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Application Report - Ultrasonic Technology - Level Measurement and Presence Detection in Acid Immersion Bats | ENG | 1764 KB |
Product Documentation: UMB800-18H40-E5-2M-Y
| Brief Instructions | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Commissioning instructions UMB*-18H*mit1 Schaltausgang / Inbetriebnahmeanleitung UMB*-18H*mit1 Schaltausgang | ALL | 271 KB |
Design / Simulation: UMB800-18H40-E5-2M-Y
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 69 KB |
Approvals: UMB800-18H40-E5-2M-Y
| Declaration of Conformity | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5004A | ALL | 71 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5563 | ALL | 64 KB |
Produkty powiązane: UMB800-18H40-E5-2M-Y
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
System czujników ultradźwiękowych USi-safety stanowi przełom w zastosowaniach związanych z bezpieczeństwem. Czujniki można stosować zarówno w trudnych warunkach, w zapylonym środowisku, jak i na zewnątrz.
Firma Pepperl+Fuchs oferuje różne dokumenty do pobrania zawierające informacje na temat czujników ultradźwiękowych.
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.