Wsparcie Czujników Przemysłowych
Wsparcie Ochrony przed wybuchem
Vision Sensor VOS2000-F226-C-I
- Reads all standard 1-D and 2-D codes
- Reads DPM codes
- Multi code reading
- Output string formatting
- Code quality output
- 32 Jobs on-board can be saved
- Offline parameterization
- 1.2 megapixel resolution
- Exchangeable lens (C-Mount)
- Mechanical focus adjustment
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne VOS2000-F226-C-I
| Opis produktu |
|---|
| Vision sensor for 1-D and 2-D code reading; Resolution: 1280 x 960 pixels; Light source: external illumination; Lens: C-mount connection |
| General specifications | ||
|---|---|---|
| Sensing range | 1-D barcode: 225 mm x 169 mm with min. line width of 0.3 mm (reading distance depends on lens) 2-D barcode: 166 mm x 125 mm with min. module size of 0.3 mm (reading distance depends on lens) 1-D barcode: 376 mm x 282 mm with min. line width of 0.5 mm (reading distance depends on lens) 2-D barcode: 278 mm x 208 mm with min. module size of 0.5 mm (reading distance depends on lens) |
|
| Light source | External lighting | |
| Picture detail | dependant of operating distance | |
| Readable codes | 1-D Codes: Code 128, Code 39, Int 2 of 5, Codabar, UPC-A/E, EAN-8/13, Code 11, Code 32, Plessey, MSI Plessey, Telepen, BC 412, Pharmacode, DataBar, Postcode, Trioptic
2-D Codes: Data Matrix, QR-Code, Micro QR-Code, PDF417, Micro PDF417, Aztec, Han Xin Code, Maxi Code, Grid Matrix, Dotcode |
|
| Trigger mode | Free-running or triggered externally | |
| Depth of focus | ± 5 % of the operating distance | |
| Evaluation frequency | 30 Hz | |
| Target velocity | max. 4 m/s | |
| Resolution | 1280 x 960 pixels | |
| Image sensor | 1/3" CMOS monochrom Global Shutter 3.75 µm pixel size |
|
| Parameterization/software | ||
| Parameter assignment | Parameterization via PC user interface VCT Tool | |
| Evaluation procedure | ||
| Identification and Verification | 1-D and 2-D codes | |
| Indicators/operating means | ||
| LED 1 | Steady blue: sensor started, not set up Steady green: job loaded, ready for execution Flashing green: job loaded and being executed, capture in progress Steady red: sensor fault |
|
| LED 2 | Flashing blue: starting (duration approx. 20 seconds) Steady green: measurement successful (Pass) Steady blue: measurement borderline (Recycle) Steady red: measurement unsuccessful (Fail) |
|
| LED 3 | Steady blue: warm reset or restart Steady red/green/yellow: network activity |
|
| Electrical specifications | ||
| Operating voltage | 12 ... 30 V DC | |
| No-load supply current | 300 mA | |
| Interface 1 | ||
| Interface type | Ethernet | |
| Protocol | PROFINET IO TCP/IP EtherNet/IP |
|
| Transfer rate | 100 MBit/s | |
| Interface 2 | ||
| Interface type | RS-232 , serial | |
| Transfer rate | 115.2 kBit/s | |
| Input | ||
| Input type | optically decoupled Inputs | |
| Input voltage | Logic low (OFF): 0 ... 3 V Logic high (ON): 11 ... 30 V Switching threshold: 12 V |
|
| Control input | Image capture trigger + 2 general purpose inputs 2 inputs can be used for job switching |
|
| Input current | 8 mA ( typical ) | |
| Internal protection circuit | 3 kΩ / 4000 V ( rms ) | |
| Switching delay | Switch-on time (ON): 20 µs Switch-off time (OFF): 10 µs Image capture trigger: 62 µs (until image capture is triggered) |
|
| Output | ||
| Output type | 3 general purpose outputs , freely programmable , optically decoupled | |
| Switching voltage | max. 30 V | |
| Switching current | max. 100 mA each output | |
| Switching delay | Switch-on time (ON): 150 µs Switch-off time (OFF): 50 µs |
|
| Standard conformity | ||
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 (with mounted lens protection cover) | |
| Connection | 8-pin M12 socket A-coded ; 12-pin M12 socket | |
| Material | ||
| Housing | anodized aluminum , plastic | |
| Installation | Mounting bracket | |
| Mass | approx. 200 g | |
| Objective connection | C-mount connection for external lens with different focal lengths | |
| Dimensions | ||
| Height | 57 mm | |
| Width | 58 mm | |
| Length | 61 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27310101 |
| ECLASS 12.0 | 27310101 |
| ECLASS 11.0 | 27310101 |
| ECLASS 10.0.1 | 27310101 |
| ECLASS 9.0 | 27310101 |
| ECLASS 8.0 | 27310101 |
| ECLASS 5.1 | 27310101 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211711 |
Details: VOS2000-F226-C-I
Informative Literature: VOS2000-F226-C-I
Product Documentation: VOS2000-F226-C-I
| Manuals | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Manual | ENG | 11739 KB |
Design / Simulation: VOS2000-F226-C-I
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1791 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VOS2000-F226-C-I
| Declaration of Conformity | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4653A | ALL | 138 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6801 | ALL | 134 KB |
Software: VOS2000-F226-C-I
| Device Description Files/Drivers | Informacja o wersji | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| EDS / EDS | ZIP | 2 KB | |
| GSDML / GSDML | ZIP | 6 KB | |
| Software Tools | |||
| Configuration Software VCT for VOS Vision Cameras / Konfigurations Software VCT für VOS Vision Kameras | ZIP | 25374 KB | |
Produkty powiązane: VOS2000-F226-C-I
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
© 2024 Wszelkie prawa zastrzeżone
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.