Wsparcie Czujników Przemysłowych
Wsparcie Ochrony przed wybuchem

AS-Interface master VBM-CTR-K20-R2

VBM-CTR-K20-R2
  • Stand alone master with PLC functionality and RS 232 interface
  • Large, graphic LCD
  • RS 232 diagnosis interface
  • Easy commissioning and fault diagnosis via LEDs and graphic display
  • Earth fault detection
  • AS-Interface noise detection

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:


Dane techniczne  VBM-CTR-K20-R2

Opis produktu
AS-Interface master RS 232 cabinet module
General specifications
AS-Interface specificationV3.0
PLC-Functionalityintegrated
Earth fault detectionintegrated
EMC monitoringintegrated
Diagnostics functionExtended function via display
UL File NumberE223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source
Functional safety related parameters
MTTFd180 a at 30 °C
Indicators/operating means
DisplayIlluminated graphical LC display for addressing and error messages
LED RS 232interface in operation; LED green
LED AS-i ACTIVEAS-Interface operation normal; LED green
LED CONFIG ERRconfiguration error; LED red
LED PRG ENABLEautom. programming; LED green
LED POWERvoltage ON; LED green
LED PRJ MODEprojecting mode active; LED yellow
LED U AS-iAS-Interface voltage; LED green
Switch SETSelection and setting of a slave address
OK buttonMode selection traditional-graphical/confirmation
Button MODEMode selection PRJ-operation/save configuration/cursor
ESC buttonMode selection traditional-graphical/cancel
Electrical specifications
Insulation voltage≥ 500 V
Rated operating voltagefrom AS-Interface
Rated operating current≤ 150 mA
Interface
Interface typeRS 232
Transfer rate1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600 or 11500 Bit/s , Automatic baud rate detection
Cable lengthmax. 30 m
Connection
AS-Interfacespring terminals, removable
Serial interfaces9-pin Sub-D socket
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013
Standard conformity
Electromagnetic compatibilityEN 61326
Degree of protectionEN 60529:2000
AS-InterfaceEN 62026-2:2013
Approvals and certificates
UL approvalAn isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed.
UL mark does not provide UL certification for any functional safety rating or aspects of the device.
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Storage temperature-15 ... 75 °C (5 ... 167 °F)
Mechanical specifications
Degree of protectionIP20
Mass460 g
Dimensions
Height120 mm
Width75 mm
Length76 mm
Construction typeLow profile housing , Stainless steel

Classifications

SystemClasscode
ECLASS 13.027242607
ECLASS 12.027242607
ECLASS 11.027242607
ECLASS 10.0.127242607
ECLASS 9.027242607
ECLASS 8.027242607
ECLASS 5.127242607
ETIM 9.0EC001603
ETIM 8.0EC001603
ETIM 7.0EC001603
ETIM 6.0EC001603
ETIM 5.0EC001603
UNSPSC 12.139121535

Details: VBM-CTR-K20-R2

Function

The VBM-CTR-K20-R2 is a stand-alone master in AS-Interface specification 3.0 with IP20. The construction type is especially suited for use in a switch cabinet.

Address allocation, acceptance of the target configuration and setting the baud rate can be managed via buttons. There are 7 LEDs on the front panel, showing the current status of the AS-Interface line.

In the AS-Interface master with graphical display the commissioning of the AS-Interface circuit and the test of the connected periphery devices can be separated completely overriding bus systems and from programming. The on-site operation via the graphic display and the four push buttons make it possible to show all of the functions on the display, which, for all other AS-Interface masters, are covered by the software AS-Interface control tools.

PLC Functionality

For PLC functionality the VBM-CTR-K20-R2 provides 16 kB program memory, 8 kB data memory, 1024 counters and 1024 timers. This is sufficient capacity to process all data arriving at the AS-Interface. The master can, therefore, also be operated as "stand-alone". The programm processing for 1000 word commands is approx. 2 ms. The programming language is based on STEP5. In the extended mode the AS-Interface CTRL functions (upload, download, start, stop, read and write marker) can be utilized.

Product Documentation: VBM-CTR-K20-R2

Language Selection:
Brief InstructionsJęzykTyp plikuRozmiar pliku
Commissioning VBM-CTR-K20-R2 / Inbetriebnahme VBM-CTR-K20-R2ALLPDF409 KB
Installation instructions VBM-CTR-K20-R2 / Montageanweisung VBM-CTR-K20-R2ALLPDF280 KB
Manuals
Manual AS-Interface 3.0 Command InterfaceENGPDF3265 KB
Manual VBM-CTR-K20-R2ENGPDF3927 KB

Design / Simulation: VBM-CTR-K20-R2

Language Selection:
CADJęzykTyp plikuRozmiar pliku
CAD 3-D / CAD 3-DALLSTP2606 KB
CAD Portal / CAD PortalALLLINK---

Approvals: VBM-CTR-K20-R2

Language Selection:
CertificatesNr. certyfikatuJęzykTyp plikuRozmiar pliku
US CA ULE223772ALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2453BALLPDF109 KB

Produkty powiązane: VBM-CTR-K20-R2

Accessories
Full version of the AS-I Control Tools including connection cablefa
Interface converter USB/RS 232fa
Pobierz bezpłatnie: Opracowanie na temat protokołów komunikacyjnych opartych na TCP (PDF)

W tym bezpłatnym opracowaniu w formacie PDF porównano różne protokoły komunikacyjne oparte na protokole TCP (AMQP, OPC UA, MQTT, REST API), które sprawdziły się w działaniu i uznawane są za podstawę rozwiązań IIoT oraz Przemysłu 4.0. Pobierz bezpłatny dokument już teraz!

Gama produktów AS-Interface

Zapoznaj się z pełną gamą naszych produktów AS-Interface.