Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

FDT Framework PACTware 3.6

PACTware 3.6
  • Universal DTM host platform
  • For all DTMs of Pepperl+Fuchs
  • Approved FDT/DTM technology
  • Free of charge
  • Internet download possible

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  PACTware 3.6

Termék leírása
FDT Framework
Interface
Connectionadapter with USB interface K-ADP-USB (for K-System)
adapter for gateways with RS-232 intrface K-ADP2 (for RPI-System)
adapter for gateways with RS-485 interface K-ADP4 (for RPI-System)
USB/RS-485 interface converter (for LB-System)
Software
Hardware requirementsPACTware 3.X requires 50 MBytes hard drive memory and a minimum of 40 MBytes main memory. Depending on the complexity of the projects and the DTMs used, the main memory requirement can be greater. A computer with a Pentium IV 450 MHz processor or better is recommended, XGA graphics, and a Microsoft-compatible mouse or equivalent pointing device arealso required.
Software requirementsPACTware 3.X runs in operating systems Windows 2000 and Windows XP. The software .NET Framework 1.1 SP1 must be installed. For printing and online help, MS Internet Explorer 4.0 or higher is required.
LanguagesGerman, English, French, Spanish, Russian can be selected
LicensingPACTware 3.X does not require licensing. Please take the license conditions of the DTMs out of the data sheets of the corresponding DTMs.
Configuration
Representation of the system configurationGraphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously.
System planning, application processingGeneration of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels.
Associated productsCD-ROM with PACTware 3.X and complete DTM-Collection of all available DTMs of the Pepperl+Fuchs H-, K-, and E-System devices, HART Multiplexers, Remote I/O-Systems, FieldConnex devices, and level devices.

Documents: PACTware 3.6

ManualsNyelvFájltípusFájlméret
Installation instructions DTM CollectionENGPDF3681 KB
Version history PACTwareENGPDF235 KB
Installationsanleitung DTM-CollectionGERPDF3682 KB
Versionshistorie PACTwareGERPDF229 KB
Instruction manuals
Release InformationRelease Information / Release InformationALLPDF80 KB

Software: PACTware 3.6

Device type managersMegjelenési információFájltípusFájlméret
PACTware 3.6 SP1 + .NET 1.1 / PACTware 3.6 SP1 + .NET 1.1Vers. 3.6.0.3ZIP73894 KB

Kapcsolódó termékek: PACTware 3.6

Accessory of
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pinfa
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Selectable sound lobe width, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pinfa
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Selectable sound lobe width, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pin , Stainless steel V2Afa
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pinfa
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Selectable sound lobe width, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pinfa
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pinfa
Device DTM for communication with DK12-11-IO-Link sensorsfa
Communication DTM for use of IO-Link-Masterfa
For WirelessHART devices, Frame application, like e. g. PACTware, must be installed separatelypa
For K-, E- and H-System, Frame application, like e. g. PACTware, must be installed separatelypa
For HART Loop Converters, Frame application, like e. g. PACTware, must be installed separatelypa
Device DTMpa
For SC-System, Frame application, like e. g. PACTware, must be installed separatelypa
For corrosion monitoring CorrTran, Frame application, like e. g. PACTware, must be installed separatelypa
User interface for PROFIBUS components, Simple access to measurements, diagnostic and configuration data, Supports any FDT/DTM hostpa
For level devices, Frame application, like e. g. PACTware, must be installed separatelypa
For Remote I/O systems, Frame application, like e. g. PACTware, must be installed separatelypa
DTMpa
Communication DTMpa