Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472
Nem rendelhető

Signal converter K23-SSI/R2/IU-C

K23-SSI/R2/IU-C
  • Suitable for the connection of sensors and absolute encoders with SSI interface
  • Analog output 0/4 mA ... 20 mA
  • RS 232/RS 485-Interface for serial readout of sensor information
  • SSI:Master or slave operation
  • Specified option for arbitrary linearization characteristics
  • Additional functions such as z. B. bit masking, concentricity function
  • Supply 18 V DC ... 30 V DC

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  K23-SSI/R2/IU-C

Termék leírása
Signal converter SSI/Analog
Electrical specifications
Rated operating voltage18 ... 30 V DC
Rated operating current≤ 170 mA at 18 V DC (5.5 V not connected)
≤ 120 mA at 30 V DC
SupplyEncoder: 5.5 V ±5 %, max. load 150 mA
Input 1
Input typeSSI
Input formatGray code, binary code
Resolution13, 21, or 25 bit
Input frequency100 Hz ... 1 MHz
Input 2
Input typeSet
Signal voltage
High≥ 10 V
Low≤ 3 V
Internal resistor5 kΩ
Output
Number/Typeanalog
Output rated operating current0/4 ... 20 mA (< 270 Ω) at ±10 V DC (> 5 kΩ)
Ambient conditions
Ambient temperature0 ... 45 °C (32 ... 113 °F)
Mechanical specifications
Connectionscrew terminals , max. core cross-section 0.34 ... 2.5 mm2
Massapprox. 190 g

Documents: K23-SSI/R2/IU-C

Instruction manualsNyelvFájltípusFájlméret
Operating Instructions K23-SSI/R2/IU-CENGPDF247 KB

Approvals+Certificates: K23-SSI/R2/IU-C

Statements of complianceTanúsítvány sz.FájltípusFájlméret
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2913PDF88 KB

Software: K23-SSI/R2/IU-C

Software ToolsMegjelenési információFájltípusFájlméret
software tool to configure K23 devices / K23-Parametrier- und Konfigurationssoftware09/2013ZIP4227 KB

Kapcsolódó termékek: K23-SSI/R2/IU-C

Accessory of
Industrial standard housing ∅58 mm, 16 Bit singleturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Servo or clamping flangefa
Solid shaft, Up to 31 bit overall resolution, CAN bus with SAE J1939 protocol, Free of wear magnetic sampling, High resolution and accuracyfa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Recessed hollow shaftfa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Recessed hollow shaftfa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Servo or clamping flangefa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Servo or clamping flangefa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Servo or clamping flangefa
Very small housing, Up to 31 bit overall resolution, CAN bus with SAE J1939 protocol, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 31 bit overall resolution, CAN bus with SAE J1939 protocol, Free of wear magnetic sampling, High resolution and accuracyfa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Recessed hollow shaftfa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interfacefa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interfacefa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interfacefa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interfacefa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Zero-set functionfa
Industrial standard housing ∅58 mm, 30 Bit multiturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interfacefa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Zero-set functionfa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Hardware encoder, Data transfer up to 2 MBaud, Optically isolated RS 422 interfacefa
Solid shaft, SSI interface, Up to 32 Bit multiturn, Free of wear magnetic sampling, High resolution and accuracyfa
Recessed hollow shaft, SSI interface, Up to 32 Bit multiturn, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 32 Bit multiturn, SSI interface, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 32 Bit multiturn, SSI interface, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 31 bit overall resolution, CANopen interface, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 31 bit overall resolution, CANopen interface, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 31 bit overall resolution, CANopen interface, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 31 bit overall resolution, CAN bus with SAE J1939 protocol, Free of wear magnetic sampling, High resolution and accuracyfa
Industrial standard housing ∅58 mm, 16 Bit singleturn, Data transfer up to 2 MBaud, Optically isolated RS 422 interface, Recessed hollow shaftfa
Solid shaft, SSI interface, Up to 32 Bit multiturn, Free of wear magnetic sampling, High resolution and accuracyfa
Very small housing, Up to 32 bit overall resolution, SSI interface, Free of wear magnetic sampling, High resolution and accuracyfa

Function: K23-SSI/R2/IU-C

The K23-SSI/R2/IU-C is a small and favourably priced, but extremely powerful converter for industrial applications, which will convert sensor and encoder information, which is available in the SSI format into an analog signal or into a serial RS 232/RS 485 format. The device is supplied in a compact housing for standard rail mounting and has 12 screw terminal connections and a 25-pin and also a 9-pin Sub-D socket.

Applicable sensors and encoders:

Singleturn or multiturn absolute encoders and all comparable sensors with SSI interface (6 ... 25 bit Binary or Gray-Code), either in the Master mode (the device generates the clock signal itself), or in the Slave mode (the device switches to an available clock signal).

Note on resolution:

The device provides only for setting options for the standard resolutions 13 bit, 21 bit and 25 bit. For sensors with other resolutions the respective next highest value must be set (e.g. 21 bit for use with a 16-bit sensor). Depending on the make and version of the sensor in question, it may be necessary in an individual case to mask out the surplus bits using the bit blanking function. However, in the routine case the device operates without fault and without further measures when the next highest resolution value is assigned.