General specifications |
Type | 2 axis acceleration sensor |
Measurement range | -2 ... 2 g |
Resolution | ≤ 5 mg |
Repeat accuracy | ≤ ± 5 mg |
Frequency range | 0 ... 100 Hz |
Functional safety related parameters |
MTTFd | 304 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED, green |
Teach-In indicator | LED, yellow |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | ≤ 25 mA |
Time delay before availability | ≤ 100 ms |
Analog output |
Output type | 2 current outputs 4 ... 20 mA (one output for each axis) |
Zero signal | 12 mA |
Slope of output characteristic | 4 mA / g |
Linearity error | ± 1.2 % |
Load resistor | 0 ... 200 Ω at UB = 10 ... 18 V 0 ... 500 Ω at UB = 18 ... 30 V |
Temperature influence | |
| Offset | ≤ ± 4 µA / K |
| Slope | ≤ ± 20 µA / g |
Compliance with standards and directives |
Standard conformity | |
| Shock and impact resistance | 100 g according to DIN EN 60068-2-27 |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates |
UL approval | cULus Listed, Class 2 Power Source |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
E1 Type approval | 10R-04 |
Ambient conditions |
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | 5-pin, M12 x 1 connector |
Housing material | PA |
Degree of protection | IP68 / IP69K |
Mass | 240 g |