Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Distributor VAZ-CHAIN-BU/BN70MM/1,0-25

VAZ-CHAIN-BU/BN70MM/1,0-25
  • For signal connection in control cabinets
  • Using the multi-purpose twist-on connectors, the daisy chain can be adjusted to the required length and installed in the field
  • Conveniently replace, install or remove individual modules without disrupting wiring

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  VAZ-CHAIN-BU/BN70MM/1,0-25

Termék leírása
25-point wiring link for control cabinet modules with screw terminals
Electrical specifications
Nominal voltage48 V
Current loading capacity8 A at 40 °C
DIN VDE 0298 Part 4
HD 516/VDE 0298-300
Ambient conditions
Ambient temperature-30 ... 80 °C (-22 ... 176 °F) fixed
Mechanical specifications
Core cross-sectionFine-stranded copper 1 mm2
Bending radiusMoving: 4 x external diameter
Fixed: 2 x external diameter
Material
Core insolationPVC
CableH05V-K, rated voltage 300/500 V
Colorbrown, blue
Connection possibilitiesSuitable for screw terminals
Cable length25 x 7 cm + 1 m
Flammability
CableFlame-retardant as per IEC 60332-1-2

Kapcsolódó termékek: VAZ-CHAIN-BU/BN70MM/1,0-25

Accessory of
Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output
(Spacing factor 1 ... 9999), 2-, 3-, 4-wire sensors and rotary encoder can be connected, Auxiliary power output for sensors, Rated voltage: 20 ... 30 V DCfa
2-channel, 115/230 V AC supply, 3-wire PNP/NPN sensor or push-pull input, Relay contact output, DIP switch selectable functions, Minimum/maximum control, Up to SIL 2 acc. to IEC 61508pa
2-channel signal conditioner, Universal usage at different power supplies, Dry contact or NAMUR inputs, Input frequency 1 mHz ... 1 kHz, Current output 0/4 mA ... 20 mA, Relay contact and transistor output, Start-up override, Configurable by PACTware or keypad, Line fault detection (LFD), Rated voltage: 20 ... 90 V DC / 48 ... 253 V AC 50 ... 60 Hzpa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa