Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Singleturn absolute encoder AHS58-H

AHS58-H
  • Industrial standard housing ∅58 mm
  • 16 Bit singleturn
  • Hardware encoder
  • Data transfer up to 2 MBaud
  • Optically isolated RS 422 interface
  • Hollow shaft

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  AHS58-H

General specifications
Detection typephotoelectric sampling
Device typeSingleturn absolute encoder
Electrical specifications
Operating voltage4.5 ... 30 V DC
No-load supply currentmax. 180 mA
Time delay before availability< 250 ms
Linearity± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output codeGray code, binary code
Code course (counting direction)cw descending (clockwise rotation, code course descending)
Interface
Interface typeSSI
Monoflop time20 ± 10 µs
Resolution
Single turnup to 16 Bit
Overall resolutionup to 16 Bit
Transfer rate0.1 ... 2 MBit/s
Voltage dropUB - 2.5 V
Standard conformityRS 422
Input 1
Input typeSelection of counting direction (cw/ccw)
Signal voltage
High4.5 ... 30 V
Low0 ... 2 V
Input current< 6 mA
Switch-on delay< 10 ms
Connection
Connectortype 9416 (M23), 12-pin, type 9416L (M23), 12-pin
Cable∅7 mm, 6 x 2 x 0.14 mm2, 1 m
Standard conformity
Degree of protectionDIN EN 60529, IP65
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
Combination 1Housing: aluminum Flange: aluminum Shaft: stainless steel
Massapprox. 300 g (combination 1)
Rotational speedmax. 3000 min -1
Moment of inertia30 gcm2
Starting torque< 3 Ncm
Shaft load
Angle offset± 0.9 °
Axial offsetstatic: ± 0.3 mm, dynamic: ± 0.1 mm
Radial offsetstatic: ± 0.5 mm, dynamic: ± 0.2 mm

CAD+CAE: AHS58-H

CADFájltípusFájlméret
CAD Portal / CAD PortalLINK---

Approvals+Certificates: AHS58-H

Statements of complianceTanúsítvány sz.FájltípusFájlméret
EU-Declaration of conformity / EU-KonformitätserklärungDOC-1952APDF74 KB
Certificates
CA UL General PurposeE223176LINK---
US UL General PurposeE223176LINK---

Kapcsolódó termékek: AHS58-H

Accessories
Suitable for the connection of sensors and absolute encoders with SSI interface, Analog output 0/4 mA ... 20 mA, RS 232/RS 485-Interface for serial readout of sensor information, SSI:Master or slave operation , Specified option for arbitrary linearization characteristicsfa
Female connector, Socket, Straight, 12-pin, Right-rotatingfa