Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Simulator IS01

IS01
  • 1-channel
  • Loop powered
  • NAMUR sensor simulator and pulse generator
  • Simulates line faults

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  IS01

Supply
Connectionloop powered
Indicators/settings
Control elementsslide switches
Configurationvia slide switches
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibilityNE 21
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-20 ... 50 °C (-4 ... 122 °F)
Storage temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Degree of protectionIP20
Massapprox. 70 g
Dimensions40 x 130 x 25 mm (1.6 x 5.1 x 1 inch)
Height130 mm
Width40 mm
Length25 mm
Construction typegray ABS handheld housing
Data for application in connection with hazardous areas
EU-type examination certificateDMT 02 ATEX E 008
MarkingEx-Hexagon II 1G EEx ia IIB T4
Voltage16 V DC
Current55 mA
Power245 mW
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.019200504
ECLASS 12.019200504
ECLASS 11.019200504
ECLASS 10.0.119200504
ECLASS 9.019200504
ECLASS 8.027279211
ECLASS 5.127279211
ETIM 9.0EC000305
ETIM 8.0EC000305
ETIM 7.0EC000305
ETIM 6.0EC000305
ETIM 5.0EC003015
UNSPSC 12.141113642

Details: IS01

Function

This simulator imitates a NAMUR proximity sensor by implementing a three-position switch. A three-position switch facilitates the selection of various test conditions.

The first position (NAMUR voltage) simulates a 1 kΩ resistive load, while the second position (sensor static) offers various sensor-damping conditions, including a short circuit simulation. The third switch position (sensor dynamic) offers the user several frequency settings between 0.1 Hz ... 1 kHz using a rectangular wave with a 50 % duty cycle.

Product Documentation: IS01

Nyelvválasztás:
Safety and Security DocumentationNyelvFájltípusFájlméret
Instruction manualENGPDF121 KB

Approvals: IS01

Nyelvválasztás:
CertificatesTanúsítvány sz.NyelvFájltípusFájlméret
Europe DMT ATEX Category (1) GDMT 02 ATEX E 008ALLPDF118 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)TDOC-3358AHUNHUNPDF182 KB
Safety Products Selector

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.