+36 88 545 902
+36 88 560 472
Type X & Ex px purge and pressurization system 6000 Control System
- Certified for Class I, Class II, Division I; Zone 1 / Zone 21 to nonhazardous
- Intrinsically safe electrical/pneumatic manifold assembly
- Intrinsically safe user interface for programming and monitoring the system
- Enclosure volume up to 450 ft3 (12.1 m3)
- Control Unit monitors system operation and controls enclosure power
- Universal mounting (brackets included)
- 316L stainless steel Type 4X enclosure
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok 6000 Control System
| Termék leírása | ||
|---|---|---|
| Type X & Ex px purge and pressurization system | ||
| General specifications | ||
|---|---|---|
| Operating mode | manual, semi-automatic, or fully automatic - programmable | |
| Number of volume exchanges | 4 to 19 | |
| Hazardous environment | gas, dust, gas and dust | |
| Supply | ||
| Rated voltage | 90 ... 264 V AC, 48 ... 62 Hz / 0.2 A 20 ... 30 V DC |
|
| Electrical specifications | ||
| Connection | Terminal blocks | |
| Input | ||
| Input I | Inputs 1, 2, 3, 4: contact input, 5 VDC @ 2 mA | |
| Input type | intrinsically safe | |
| Input II | Temperature inputs | |
| Input type | intrinsically safe | |
| Sensor type | 6000-TEMP | |
| Input III | EPV-6000 Vent | |
| Input type | intrinsically safe | |
| Input IV | User interface module | |
| Connection | M8 connector, 4-pin | |
| Input type | intrinsically safe | |
| Output | ||
| Output I | AUX 1 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A @ 240 VAC resistive load 2 A @ 24 VDC |
|
| Output II | AUX 2 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A @ 240 VAC resistive load 8 A @ 24 VDC |
|
| Output III | ENC_1, ENC_2 (protected enclosure contacts) | |
| Output type | Dry contacts (2) SPST, NO | |
| Contact loading | 8 A @ 240 VAC / 120 VAC resistive load 8 A @ 24 VDC |
|
| Indicators/settings | ||
| LED indicator | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - 6000 series system fault |
|
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Pressure requirement | 20 ... 120 psig (1.4 ... 8.3 bar) (138 ... 827 kPa) regulated | |
| Safe pressure | Gas: 0.25" wc (6.4 mm wc) (0.625 mbar) (62 Pa) Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) (162 Pa) Gas and Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) ( 162 Pa) |
|
| Purge flow rate | Maximum flow rate measurement for enclosure size (enclosure volume:flow rate): < 20 ft³ (0.57m³): 5, 12 SCFM (56, 141, 340 l/min), or dynamic 20 ... 30 ft³ (0.57 ... 0.85 m³): 5, 12, 20 SCFM (56, 141, 340, 565 l/min), or dynamic > 30 ft³ (0.85m³): 5, 12, 20, 30 SCFM (56, 141, 340, 565, 850 l/min), or dynamic |
|
| Purge flow and enclosure pressure rate | With EPV-6000-xx-01, EPV-6000-xx-02 5 SCFM @ 1.5" wc, (141 l/min @ 3.7 mbar) 12 SCFM @ 2.0" wc, (340 l/min @ 5.0 mbar) 20 SCFM @ 2.7" wc, (565 l/min @ 6.7 mbar) 30 SCFM @ 4.1" wc, (850 l/min @ 10.2 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 5 SCFM @ 2.1" wc, (141 l/min @ 5.2 mbar 12 SCFM @ 2.6" wc, (340 l/min @ 6.5 mbar) 20 SCFM @ 4.1" wc, (565 l/min @ 10.2 mbar) 30 SCFM @ 5.3" wc, (850 l/min @ 13.2 mbar) With EPV-6000-xx-05, EPV-6000-xx-06 5 SCFM @ 1.8" wc, (141 l/min @ 4.5 mbar) 12 SCFM @ 2.9" wc, (340 l/min @ 7.3 mbar) 20 SCFM @ 7.4" wc, (565 l/min @ 18.5 mbar) |
|
| Flow rate for leakage compensation | Depends on enclosure seal. With EPV-6000-xx-01, EPV-6000-xx-02 0.35 SCFM @ 0.25" wc (10.0 l/min @ 6.3 mbar) 1.0 SCFM @ 0.75" wc (28.0 l/min @ 1.9 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 0.22 SCFM @ 0.25" wc (6.2 l/min @ 6.3 mbar) 0.58 SCFM @ 0.75" wc (16.4 l/min @ 1.9 mbar) With EPV-6000-xx-05, EPV-6000-xx-06 0.15 SCFM @ 0.25" wc (4.2 l/min @ 6.3 mbar) 0.35 SCFM @ 0.75" wc (10.0 l/min @ 1.9 mbar) |
|
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes | |
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Connection type | Pneumatic : Inlet fitting to manifold: 3/8" NPT (female) Outlet fitting from manifold: 3/8" bulkhead fitting (provided) |
|
| Cable gland | 4 - M16 x 1.5 cable gland | |
| Degree of protection | Type 4X , IP66 | |
| Material | Enclosure: 316L (UNS S31603) stainless steel Manifold valve: anodized 6082 aluminum Fittings: 316L (UNS S31603) stainless steel |
|
| Mass | -WH- 11.4 kg (25 lb) -CK- 7.2 kg (16 lb) |
|
| Dimensions | 183 x 367.5 x 152.5 mm (7.20 x 14.45 x 6.00 inch) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | ||
| Marking | 6000 main control unit with housing 6000-xx-S2-UN-xx-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db [ib pxb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex ib tb [ib pxb] IIIC T60°C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 main control unit kit version 6000-xx-S2-UN-CK-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db [ib pxb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex tb [ib pxb] IIIC T80°C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex ib [pxb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 94/9/EC | IEC/EN 60079-0 IEC/EN 60079-1 IEC/EN 60079-2 IEC/EN 60079-7 IEC/EN 60079-11 IEC/EN 60079-31 |
|
| International approvals | ||
| UL approval | 6000 Main control unit with housing 6000-xx-S2-UN-xx-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 50 °C) Class I, Zone 1, Group IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Zone 21, Group IIIC T60 °C (-20 °C ≤ Ta ≤ 50 °C) [Ex i] Associated Equipment Ex db [ib pxb] IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Ex db tb [ib pxb] IIIC T4 (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 60 °C) Class I, Zone 1, Group IIC T4 Class II, Zone 21, Group IIIC T60 °C [Ex i] Associated Equipment Ex db [ib pxb] IIC T4 X (-20 °C ≤ Ta ≤ 60 °C) Ex db [ib pxb] IIIC T4 X (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: cULus (-20 °C ≤ Ta ≤ 60 °C) Class I, Division 1, Groups A,B,C,D T4 Class I, Zone 1, Group IIC T4 Ex i Intrinsically safe |
|
| IECEx approval | 6000 Main Control unit with housing 6000-xx-S2-UN-xx-xx: IECEx UL 08.0003X Ex db [ib pxb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex db tb [ib pxb] IIIC T60 °C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: IECEx UL 08.0003X Ex db [ib pxb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex db [ib pxb] IIIC T80 °C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: IECEx UL 08.0003X Ex ib [pxb] IIC T4 Gb |
|
Documents: 6000 Control System
| Manuals | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Installation and Operation Manual 6000 Series Purge/Pressurization System | ENG | 13375 KB | |
| Instructions, short instructions, safety information | |||
| Purge & Pressurization Smart App - Users Guide / Purge & Pressurization Smart App - Users Guide | ALL | 1771 KB | |
| Programming Tree 6000 Series Purge/Pressurization System | ENG | 1157 KB | |
| Programming Worksheet 6000 Series Purge/Pressurization System | ENG | 1399 KB | |
| Technical information | |||
| The 6000 Series New Firmware & Temperature Hub and Sensors / technische Information (TI) | USA | 2761 KB | |
| Product information | |||
| Pepperl+Fuchs Bebco EPS® 6000 Series Purge/ Pressurization System | ENG | 893 KB | |
CAD+CAE: 6000 Control System
| CAD | Fájltípus | Fájlméret | |
|---|---|---|---|
| 2D / DXF Files for 6000 Series component kit / CAD-Dateien 2-D | ZIP | 1162 KB | |
| CAD and STP drawings of 6000 Series complete unit / CAD-Dateien 2-D | ZIP | 6729 KB |
Approvals+Certificates: 6000 Control System
| Statements of compliance | Tanúsítvány sz. | Fájltípus | Fájlméret |
|---|---|---|---|
| EU-Declaration of Conformity / EU-Konformitätserklärung | DOC-B066B | 164 KB | |
| Certificates | |||
| ATEX Certificate | DEMKO 07 ATEX 0705753X | 974 KB | |
| China NEPSI | GYJ16 1215X | 3217 KB | |
| IECEx Certificate of Conformity | IECEx UL 08.0003X | LINK | --- |
| Korea KOSHA | 14-AV4BO-0083 | 322 KB | |
| PESO (India) CCOE | A/P/HQ/MH/104/4757 (P383926) | 696 KB | |
| Taiwan Certificate of Compliance | ML0411007025K3 | 181 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7 , RFPZ7) | 1081 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7 , RFPZ7) | LINK | --- |
| UL Hazardous Location | E184741 (RFPW, RFPW7, RFPZ7) | LINK | --- |
| Control drawings | |||
| Control drawing UL / Control drawing UL | 702 KB | ||
Kapcsolódó termékek: 6000 Control System
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
Ismerje meg, hogyan biztosíthatja a legokosabb módon a robbanásveszélyes helyek védelmét, és konfigurálhatja saját öblítő- és nyomásfokozó rendszerét!
Ez az interaktív alkalmazás lépésről lépésre szimulálja az öblítő és nyomásfokozó rendszer programozását. Töltse le ingyen az alkalmazást iOS vagy Androidos készülékére ...
Pepperl+Fuchs Hungary
8200 VESZPRÉM
Kistó utca 16-18.
sales@hu.pepperl-fuchs.com
© 2019 Minden jog fenntartva.
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6200 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.