Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem

Retroreflective sensor RLK28-55-1518

RLK28-55-1518
  • Ultra bright LEDs for power on, weak signal indication and switching state
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Waterproof, degree of protection IP67
  • Protection class II

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   RLK28-55-1518

Popis produktu
Retroreflective sensor with polarization filter
General specifications
Effective detection range0 ... 17 m
Reflector distance0.05 ... 17 m
Threshold detection range21 m
Reference targetH85-2 reflector
Light sourceLED
Light typemodulated visible red light , 660 nm
Polarization filteryes
Diameter of the light spotapprox. 290 mm at a distance of 17 m
Angle of divergenceemitter 1.2°
receiver 2°
Ambient light limit80000 Lux
Functional safety related parameters
MTTFd600 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Function indicator2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Control elementssensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch
Electrical specifications
Operating voltage12 ... 240 V AC/DC
Power consumption≤ 3.5 VA
Output
Switching typelight/dark on switchable
Signal outputrelay, 1 NO
Switching voltagemax. 250 V AC/DC
Switching currentmax. 2 A
Switching powerDC: max. 50 W AC: max. 500 VA
Switching frequency25 Hz
Response time20 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140.
Caution!
The protection class 2 is only valid when the terminal compartment is closed.
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width25.8 mm
Housing height88 mm
Housing depth65.5 mm
Degree of protectionIP67
Connectionconnector M18, 4-pin
Material
HousingPlastic ABS
Optical facePlastic pane
Mass112 g

Documents: RLK28-55-1518

Instruction leafletsJazykTyp souboruVelikost souboru
Instruction leaflet / Beipackzettel ALLPDF557 KB

CAD+CAE: RLK28-55-1518

CADTyp souboruVelikost souboru
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS1787 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP608 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: RLK28-55-1518

Statements of complianceČíslo certifikátuTyp souboruVelikost souboru
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0068APDF106 KB
Certificates
Canada USA UL Ordinary Location20170307-E87056PDF403 KB

Související produkty: RLK28-55-1518

Accessories
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting bracket fa
Mounting bracket fa
Mounting bracket for rear wall mountingfa
Weld slag cover modelfa