Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem

Diffuse mode sensor (PRT) OQD8000-R300-2EP-V1-L

OQD8000-R300-2EP-V1-L
  • Extremely long detection range paves the way for new applications
  • Pulse Ranging Technology (PRT)
  • Visible light source for easy alignment
  • Minimal black-white difference
  • Absolutely reliable background suppression

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   OQD8000-R300-2EP-V1-L

Popis produktu
Diffuse sensor with measurement core technology
General specifications
Detection range0.03 ... 8 m
Adjustment range0.05 ... 8 m
Reference targetKodak white (90%)
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
Laser class1M
Wave length660 nm
Beam divergence< 25 mrad
Pulse length4 ns
Repetition rate250 kHz
max. pulse energy< 2.4 nJ
Black-white difference (6 %/90 %)< 0.5 %
Angle deviationmax. ± 2°
Measuring methodPulse Ranging Technology (PRT)
Diameter of the light spotvertical 60 mm , horizontal 30 mm at a distance of 2 m
Ambient light limit50000 Lux
Functional safety related parameters
MTTFd100 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Function indicator2 LEDs yellow for switching state
Teach-In indicatorTeach-In: LED green/yellow equiphase flashing; 2.5 Hz
Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
Control elements5-step rotary switch for operating modes selection (threshold setting and operating modes)
Control elementsSwitch for setting the threshold values
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 % within the supply tolerance
No-load supply current≤ 80 mA / 24 V DC
Time delay before availability< 0.7 s , for temperatures <-30°C compliance of the specification 5 mins after power on
Output
Signal output2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Switching frequency50 Hz
Response time5 ms
Conformity
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Approvals and certificates
EAC conformityTR CU 020/2011
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-40 ... 55 °C (-40 ... 131 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width25.8 mm
Housing height88 mm
Housing depth54.3 mm
Degree of protectionIP67
Connection4-pin, M12 x 1 connector
Material
HousingPlastic ABS
Optical facePMMA
Mass90 g

Classifications

SystemClasscode
ECLASS 11.027270903
ECLASS 10.0.127270903
ECLASS 9.027270903
ECLASS 8.027270903
ECLASS 5.127270903
ETIM 8.0EC001821
ETIM 7.0EC001821
ETIM 6.0EC001821
ETIM 5.0EC001821
UNSPSC 12.139121528

Documents: OQD8000-R300-2EP-V1-L

Instruction leafletsJazykTyp souboruVelikost souboru
Instruction leaflet / BeipackzettelALLPDF263 KB

Approvals+Certificates: OQD8000-R300-2EP-V1-L

Statements of complianceČíslo certifikátuTyp souboruVelikost souboru
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2583BPDF83 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF407 KB
EU Pepperl+FuchsPF08CERT1243PDF475 KB

Související produkty: OQD8000-R300-2EP-V1-L

Accessories
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting bracket: mounting aid for sensors in the RL* seriesfa
Mounting aid for RL* seriesfa
Mounting bracket for rear wall mountingfa
dove tail mounting clampfa
dove tail mounting clampfa
Metal enclosure for inserting protective panes or aperturesfa
Mounting and fine adjustment device for sensors from the 28 seriesfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Fotoelektrické senzory řad R10x a R20x

Poprvé je k dispozici ucelená řada řešení využívajících fotoelektrické funkční principy a inovativní technologie ve shodných pouzdrech. Uživatelé mohou těžit z jednotné provozní koncepce napříč celým portfoliem. Seznamte se s řadami R100, R101, R103, R200 a R201…

Fotoelektrický senzor ML100

Ať už jde o skleněné solární destičky, nebo desky s plošnými spoji: Fotoelektrické senzory řady ML100 jsou přesně přizpůsobeny požadavkům různých složitých detekčních úloh. Další informace o portfoliu…