Diffuse mode sensor OBD8000-R300-2P1-V1-L
- Extremely long detection range paves the way for new applications
- Pulse Ranging Technology (PRT)
- Visible light source for easy alignment
- Minimal black-white difference
- Switch point adjustment with quick twist
- Absolutely reliable background suppression
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data OBD8000-R300-2P1-V1-L
| Popis produktu | ||
|---|---|---|
| Diffuse mode sensor | ||
| General specifications | ||
|---|---|---|
| Detection range | 0.03 ... 8 m | |
| Adjustment range | 0.05 ... 8 m | |
| Reference target | Kodak white (90%) | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS | |
| Laser class | 1M | |
| Wave length | 660 nm | |
| Beam divergence | < 25 mrad | |
| Pulse length | 4 ns | |
| Repetition rate | 250 kHz | |
| max. pulse energy | < 2.4 nJ | |
| Black-white difference (6 %/90 %) | < 0.5 % | |
| Angle deviation | max. ± 2° | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Diameter of the light spot | vertical 60 mm , horizontal 30 mm at a distance of 2 m | |
| Ambient light limit | 50000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 100 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 LEDs yellow for switching state | |
| Control elements | Sensing range adjuster | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 80 mA / 24 V DC | |
| Time delay before availability | < 0.7 s , for temperatures <-30°C compliance of the specification 5 mins after power on | |
| Output | ||
| Switching type | Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on |
|
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Switching frequency | 50 Hz | |
| Response time | 5 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2014 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 | |
| FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Housing width | 25.8 mm | |
| Housing height | 88 mm | |
| Housing depth | 54.3 mm | |
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | PMMA | |
| Mass | 90 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Documents: OBD8000-R300-2P1-V1-L
| Instruction leaflets | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 263 KB |
CAD+CAE: OBD8000-R300-2P1-V1-L
| CAD | Typ souboru | Velikost souboru | |
|---|---|---|---|
| 3-D model / 3-D-Modell | STP | 1290 KB | |
| CAD Portal / CAD Portal | LINK | --- | |
| EPLAN | |||
| EPLAN Data Portal / EPLAN Data Portal | LINK | --- | |
| EPLAN macro P+F.OBD8000-R300-2P1-V1-L.edz / EPLAN-Makro P+F.OBD8000-R300-2P1-V1-L.edz | EDZ | 70 KB | |
Approvals+Certificates: OBD8000-R300-2P1-V1-L
| Statements of compliance | Číslo certifikátu | Typ souboru | Velikost souboru |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-2583B | 83 KB | |
| Certificates | |||
| Canada USA UL Ordinary Location | 20170306-E87056 | 407 KB | |
| EU Pepperl+Fuchs | PF08CERT1243 | 475 KB | |
Související produkty: OBD8000-R300-2P1-V1-L
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Poprvé je k dispozici ucelená řada řešení využívajících fotoelektrické funkční principy a inovativní technologie ve shodných pouzdrech. Uživatelé mohou těžit z jednotné provozní koncepce napříč celým portfoliem. Seznamte se s řadami R100, R101, R103, R200 a R201…
Ať už jde o skleněné solární destičky, nebo desky s plošnými spoji: Fotoelektrické senzory řady ML100 jsou přesně přizpůsobeny požadavkům různých složitých detekčních úloh. Další informace o portfoliu…
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.