Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

ASi illuminated button module VAA-LT3-F86-V1

VAA-LT3-F86-V1
  • Empty housing for the installation of up to 6 built-in buttons, built-in lamps or similar with diameter 22 mm
  • Connection of the illuminated pushbuttons via pluggable screw terminals
  • Degree of protection IP65 possible
  • Integrated communication monitoring function
  • Inputs and outputs short-circuit and overload proof
  • No external power supply required
  • M12 plug for simple connection to AS-Interface

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  VAA-LT3-F86-V1

Termék leírása
Luminous push-button module, 4 inputs/4outputs
General specifications
Node typeStandard node
AS-Interface specificationV2.0
Required gateway specification≥ V2.0
Electrical specifications
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Rated operating current≤ 30 mA (without sensors) / max. 180 mA
Protection classIII
Input
Number/Type4 inputs for mechanical contacts
Supplyfrom AS-Interface
Voltage21 ... 31 V
Input current≤ 8 mA (limited internally)
Switching pointaccording to EN 61131-2 Typ 1
0 (unattenuated)≤ 1.5 mA
1 (attenuated)≥ 4 mA
Output
Number/Type4 electronic outputs, PNP
Supplyfrom AS-Interface
Voltage21 ... 31 V
Current≤ 100 mA per output, ≤ 140 mA total
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013
Standard conformity
Degree of protectionEN 60529:2000
AS-InterfaceEN 62026-2:2013
Programming instructions
ProfileS-7.0
IO code7
ID code0
ID1 codeF
ID2 codeE
Data bits (function via AS-Interface)InputOutput
D0 IN1 OUT1
D1 IN2 OUT2
D2 IN3 OUT3
D3 IN4 OUT4
Parameter bits (programmable via AS-i)function
P0not used
P1not used
P2not used
P3not used
Ambient conditions
Ambient temperature-25 ... 40 °C (-13 ... 104 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP65 in accordance with EN 60529 (with corresponding displays and controls)
ConnectionM12 round connector

Classifications

SystemClasscode
ECLASS 13.027371228
ECLASS 12.027371228
ECLASS 11.027371228
ECLASS 10.0.127371228
ECLASS 9.027371228
ECLASS 8.027371228
ECLASS 5.127371228
ETIM 9.0EC001028
ETIM 8.0EC001028
ETIM 7.0EC001028
ETIM 6.0EC001028
ETIM 5.0EC001028
UNSPSC 12.139121533

Details: VAA-LT3-F86-V1

Function

The VAA-LT3-F86-V1 light sensor module creates a connection between the operating personnel and the AS-Interface master. The housing is designed in combination with suitable display and control elements in protection type IP65.

The internal AS-Interface I/O module is ideally suited to integrating customer-specific electronics, for example light sensors or LED lights. The printed circuit board is supplied entirely from the AS-Interface. The inputs and outputs are protected against short circuits and overload and the connection between the display and control elements and the AS-Interface circuit board can be plugged in with screw-on plug-in terminals. The connection to the AS-Interface is implemented by means of a V1 round plug (M12 x 1).

An overloading of the outputs is signalled to the AS-Interface master via the "Peripheral fault" function. Communication via the AS-Interface remains intact.

The luminous push-button module can be expanded by means of an additional printed circuit board module VAA-4E4A-CB1-Z/E2.

Note:

Communication monitoring is integrated. This switches the outputs to a currentless state if no communication is taking place over the AS-Interface cable.

Product Documentation: VAA-LT3-F86-V1

Nyelvválasztás:
Brief InstructionsNyelvFájltípusFájlméret
Instruction leaflet / BeipackzettelALLPDF360 KB

Approvals: VAA-LT3-F86-V1

Nyelvválasztás:
Declaration of ConformityTanúsítvány sz.NyelvFájltípusFájlméret
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2715BALLPDF116 KB

Kapcsolódó termékek: VAA-LT3-F86-V1

Accessories
I/O module as encapsulated PCB with 4 inputs and 4 outputsfa
Splitter box AS-Interface to 1x M12 round connectorfa
Ingyenes letöltés: Tanulmány a TCP-alapú kommunikációs protokollokról (PDF)

Ebben az ingyenes PDF tanulmányban összehasonlítjuk a különböző TCP-alapú kommunikációs protokollokat (AMQP, OPC UA, MQTT, REST API), amelyek kimagaslanak a mezőnyből és amiket az IIoT-t és az Ipar 4.0-t lehetővé tevő technológiaként tartanak számon. Töltse le ingyenesen most!

AS-Interfész termékkínálat

Tekintse meg az AS-Interfész termékek teljes választékát!