USB Fieldbus Power Supply USB-FBPS-1.11.45.NI
- Output: min. 11 V/45 mA
- For 1...2 devices/test setups
- In conjunction with NI PCMCIA-FBUS card
- Permitted for Zone 2 operation
- For FOUNDATION Fieldbus H1
- Compatible with Windows® XP, Vista, 7, 8, or 10
- USB 1.1/2.0 compatible
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok USB-FBPS-1.11.45.NI
| Termék leírása |
|---|
| USB Fieldbus Power Supply |
| General specifications | ||
|---|---|---|
| Design / Mounting | Handheld/mobile | |
| Supply | ||
| Connection | USB-Male Connector Typ A (Standard) | |
| Rated voltage | typ. 5 V | |
| Rated current | max. 350 mA | |
| Power dissipation | typ. 250 mW | |
| Fieldbus connection | ||
| Connection | D-Sub socket 9-pin ; pin 6: Bus + , pin 7: Bus - | |
| Rated voltage | min. 11 V | |
| Rated current | 45 mA | |
| Short-circuit current | typ. 60 mA | |
| Terminating resistor | 50 Ω | |
| Indicators/operating means | ||
| LED ERR | red flashing: short-circuit or undervoltage at output | |
| LED PWR | green: Interface Power ON/OK | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Degree of protection | IEC/EN 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Pollution degree | max. 2, according to IEC 60664 | |
| Mechanical specifications | ||
| Connection type | USB-Male Connector Typ A (Standard) | |
| Housing | 56 x 32 x 17 mm | |
| Housing material | Polycarbonate | |
| Degree of protection | IP20 | |
| Mass | approx. 105 g | |
| Data for application in connection with hazardous areas | ||
| Outputs | ||
| Voltage | 17.5 V | |
| Certificate | PF 08 CERT 1303 X | |
| Marking |  II 3G Ex nA II T4 |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 | |
| General information | ||
| Supplementary information | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242611 |
| ECLASS 12.0 | 27242611 |
| ECLASS 11.0 | 27242611 |
| ECLASS 10.0.1 | 27242611 |
| ECLASS 9.0 | 27242611 |
| ECLASS 8.0 | 27242611 |
| ECLASS 5.1 | 27242611 |
| ETIM 9.0 | EC002583 |
| ETIM 8.0 | EC002583 |
| ETIM 7.0 | EC002583 |
| ETIM 6.0 | EC002583 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121004 |
Details: USB-FBPS-1.11.45.NI
Function
The USB-FBPS-1.11.45.NI fieldbus power supply powers one or two field devices. It connects via D-SUB female connector to the popular NI PCMCIA FBUS card by National Instruments.
This small unit is designed to enable commissioning and maintenance personnel to conduct single field device work typical during plant start-up or maintenance: device configuration download, functional test, and device tagging. The power supply provides the infrastructure from the convenience of a laptop or PC, or any other USB-port.
This device complements the portfolio of FieldConnex ® tools for the fieldbus practitioner on the go. It complements the mobile Diagnostic Module DM-AM for check-out, monitoring, and troubleshooting of single fieldbus segments.
Informative Literature: USB-FBPS-1.11.45.NI
| Literature | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Product Documentation: USB-FBPS-1.11.45.NI
| Safety and Security Documentation | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Használati útmutató | HUN | 122 KB |
Approvals: USB-FBPS-1.11.45.NI
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| Pepperl+Fuchs ATEX Category 3 G | PF 08 CERT 1303X | ALL | 206 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0816C | ALL | 1039 KB | |
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.