Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Laser light sensor VLM700-F280-R4-1102

VLM700-F280-R4-1102
  • Comparison of up to 32 height profiles
  • Output of X/Z offset
  • Intelligent exposure time control
  • Laser class 1, eyesafe
  • Data Matrix control codes for parameterization

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  VLM700-F280-R4-1102

Termék leírása
Laser light sensor for profile matching; Comparison of up to 32 height profiles; Output of X/Z offset; Resolution: 1280 x 960 pixels; Measuring range: X = 60 ... 300 mm, Z = 100 ... 700 mm; Scan rate: 15 s-1; 2 digital outputs; RS-485 interface
General specifications
Measurement rangeX = 60 ... 300 mm ; Z = 100 ... 700 mm
Light sourcelaser diode
Light typered laser + Integrated LED lightning red 650 nm
Laser nominal ratings
NoteVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
Laser class1
Wave lengthMeasuring laser: 660 nm
Pulse lengthMeasuring laser: 0.5 ms
Maximum optical power outputMeasuring laser: 15 mW
Laser monitoringThe safety system switches off the laser when the laser current is too high
Scan rate15 s-1
ResolutionX>0.44 mm; Z>0.4 mm at 60 mm distance
X>1.0 mm; Z>2.0 mm at 400 mm distance
X>1.8 mm; Z>11.1 mm at 700 mm distance
Functional safety related parameters
MTTFd20 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Diagnostics indicatorLED yellow / red
Function indicatorTrigger: LED yellow ; object detected : LED red / green
Control elements2 push-buttons
Electrical specifications
Operating voltage24 V ± 20 % , PELV
No-load supply currentmax. 250 mA
Power consumptionmax. 6 W , Outputs without load
Interface
Interface typeRS 485 interface
Physical Switchable terminal resistor
Protocolbinary code
Transfer rate38400 ... 230400 Bit/s
Input
Input voltage24 V
Number/TypeExternal triggering + 1 Input
Switching thresholdlow: < 2.5 V, high: > 8 V
Output
Number/Type2 digital outputs
Switching typePNP
Switching voltage24 V
Switching current150 mA each output
Compliance with standards and directives
Standard conformity
Noise immunityEN 61000-6-2:2005
Emitted interferenceEN 61000-6-4:2007/A1:2011
Degree of protectionEN 60529
Shock and impact resistanceEN 60068-2-27:2009
Laser classIEC 60825-1:2007
Approvals and certificates
UL approvalcULus Listed, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
ApprovalsCE
Ambient conditions
Operating temperature-20 ... 45 °C (-4 ... 113 °F) ,   (noncondensing; prevent icing on the lens!)
Storage temperature-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protectionIP67
Connection8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system
Material
HousingPC/ABS
Optical facePlastic pane
Massapprox. 125 g
Tightening torque, fastening screwsmax. 2 Nm
Dimensions
Height85 mm
Width38 mm
Depth55 mm
General information
NoteSecurity Instructions:
- Read the operating instructions before attempting commissioning
- Installation, connection and adjustments should only be undertaken by specialist personnel
- Not a safety component in accordance with the EU Machinery Directive

Classifications

SystemClasscode
ECLASS 13.027270916
ECLASS 12.027270916
ECLASS 11.027270801
ECLASS 10.0.127270801
ECLASS 9.027270801
ECLASS 8.027270801
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: VLM700-F280-R4-1102

Function

The SmartRunner Matcher compares current height profiles with a previously taught-in height profile. The Matcher is based on innovative SmartRunner technology and combines the light section method for detecting height profiles with a 2-D vision sensor. The light section method involves projecting a laser line onto an object. This is then detected by a camera at a specific angle. A height profile is then created using the triangulation principle. This innovative laser technology provides reliable measurements on different surfaces.

Product Documentation: VLM700-F280-R4-1102

Nyelvválasztás:
ManualsNyelvFájltípusFájlméret
ManualENGPDF4136 KB

Design / Simulation: VLM700-F280-R4-1102

Nyelvválasztás:
CADNyelvFájltípusFájlméret
3-D model / 3-D-ModellALLSTP8066 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ59 KB

Approvals: VLM700-F280-R4-1102

Nyelvválasztás:
Declaration of ConformityTanúsítvány sz.NyelvFájltípusFájlméret
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3518FALLPDF39 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6621ALLPDF224 KB

Software: VLM700-F280-R4-1102

Nyelvválasztás:
Software ToolsMegjelenési információFájltípusFájlméret
Software Vision Configurator / Software Vision ConfiguratorV6.6.2ZIP31588 KB

Kapcsolódó termékek: VLM700-F280-R4-1102

Accessories

Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa
Mounting bracket fa
Mounting bracket fa
USB to RS 485 interface converter, Extension cable 0.8 m in scope of delivery, Power supply for 95 - 230 V AC, For RS485fa
Cordset for SmartRunner Matcher, M12 to M12, 8/4-pin, PUR cablefa
Interface module with PROFIBUS interface for SmartRunner, Up to 4 sensors can be connected, DIN rail mounting, PROFIBUS interfacefa
Interface module with PROFINET interface for SmartRunner, Up to 4 sensors can be connected, DIN rail mounting, Ethernet interface with PROFINET, Integrated switchfa
Interface module with EtherCAT interface for SmartRunner, Up to 4 read heads can be connected, DIN rail mounting, EtherCAT interface, Integrated switchfa
Interface module with EtherNet/IP interface for SmartRunner, Up to 4 read heads can be connected, DIN rail mounting, EtherNet/IP, Integrated switchfa
Weld slag cover modelfa
Replacement glass for SmartRunner protective housingfa

Ismerje meg a SmartRunner fényszakasz-érzékelőket, amelyek a lézeres fényszakasz technológia és az integrált LED-lámpákkal ellátott kétdimenziós képfeldolgozó érzékelő (vision sensor) egyedi kombinációját nyújtják…