FieldConnex Ethernet-APL a infrastruktura provozních sběrnic

Nedostupné pro prodej

Universal Fieldbus Power Hub, Motherboard for Yokogawa ALF 111 MB-FB-4R.YO

4 segments, redundant, individual modules per segment
Customized for Yokogawa, ALF 111
High-power trunk: Live work on devices in any hazardous area
Features for best signal quality, low heat dissipation
For FOUNDATION Fieldbus H1
Optional advanced diagnostics
Passive impedance and CREST technology for high reliability
Supports Ex ic/nL voltage limitation
Installation in Zone 2/Div. 2

Technical Data
Documents
Approvals+Certificates
Související produkty
Zeptejte se odborníků

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Výňatek z katalogového listu: Technická data MB-FB-4R.YO

Supply
Connection		redundant
Rated voltage		19.2 ... 35 V SELV/PELV
Rated current		16 A
Fieldbus connection
Number of segments
	Redundant	4
Host-side		redundant Yokogawa ALF111 with AKB336 interface cables
Terminating resistor		selectable 100 Ω
Indicators/operating means
Fault signal		VFC alarm output via connectors
Galvanic isolation
Fieldbus segment/Fieldbus segment		functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Fieldbus segment/Supply		functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Pollution degree		max. 2, according to IEC 60664
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		screw terminals
Core cross section		2.5 mm²
Housing material		Polycarbonate
Degree of protection		IP20
Mass		approx. 1.3 kg
Dimensions
	Height	220 mm
	Width	220 mm
	Depth	65 mm
Mounting		DIN mounting rail
Coating		conformal coated
Data for application in connection with hazardous areas
Certificate		TÜV 04 ATEX 2500 X
	Marking	II 3 G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval		CoC 3024816, CoC 3024816C
	Approved for	Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nA IIC T4
IECEx approval		IECEx TUN 13.0038X
	Approved for	Ex nA IIC T4 Gc
Certificates and approvals
FOUNDATION Fieldbus		FF-830
General information
Supplementary information		Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242603
ECLASS 12.0	27242603
ECLASS 11.0	27242603
ECLASS 10.0.1	27242603
ECLASS 9.0	27242603
ECLASS 8.0	27242603
ECLASS 5.1	27242603
ETIM 9.0	EC001598
ETIM 8.0	EC001598
ETIM 7.0	EC001598
ETIM 6.0	EC001598
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: MB-FB-4R.YO

Datasheet: MB-FB-4R.YO

Datasheet	Typ souboru	Velikost souboru
Datasheet MB-FB-4R.YO	PDF	1047 KB
Datenblatt MB-FB-4R.YO	PDF	1047 KB

Documents: MB-FB-4R.YO

Manuals	Typ souboru	Velikost souboru
Manual	PDF	1780 KB
Application reports
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	PDF	470 KB
Applikationsbericht - Digitale Kommunikation in der Produktion von Grobblechen	PDF	473 KB
Applikationsbericht - Steuerung und Überwachung der Kälteanlagen im Deutschen Elektronen-Synchrotron	PDF	643 KB
Documents
Application Guideline	PDF	830 KB
Conformity matrix for R2-SP-IC* and F2-SP-IC* with motherboards: MB-, MBHD, FBTA-228-BPFB-8, FBTA-228-BPFB-R-4R and power supply modules: HD2-FBPS-*	PDF	73 KB

Approvals+Certificates: MB-FB-4R.YO

Certificates	Typ souboru	Velikost souboru
Canada FM	PDF	356 KB
Europe TUV Nord ATEX Category 3 G	PDF	1498 KB
India PESO (India) CCOE	PDF	101 KB
USA FM	PDF	213 KB
Worldwide TUV Nord Ex nA nC IECEx nA	LINK	---

Související produkty: MB-FB-4R.YO

Matching System Components

	HD2-DM-A Fieldbus Power Hub, Advanced Diagnostic Module
	Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	HD2-DM-B Fieldbus Power Hub, Basic Diagnostic Module
	Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	HD2-FBPS-1.17.500 Fieldbus Power Hub, Power Supply Module
	Output: 15 ... 17 V/500 mA, Voltage limitation for FISCO ic, Entity ic, also FNICO and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus power supply, Design / Mounting: Motherboard basedpa

	HD2-FBPS-1.23.500 Fieldbus Power Hub, Power Supply Module
	Output: 21 ... 23 V/500 mA, Voltage limitation for Entity ic and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus power supply, Design / Mounting: Motherboard basedpa

	HD2-FBPS-1.25.360 Fieldbus Power Hub, Power Supply Module
	2-channel power supply system, modular, motherboard-based with transparent coupling between PROFIBUS DP and PA. motherboard and modules, 2 segments, simplex, individual modules per segment, Couples PROFIBUS PA devices transparently to PROFIBUS DP, High-power trunk: Live work on devices in any hazardous area, Transparent, configuration free, Optimized for size and quality, low heat dissipation, IECEx approval, International, Europe, USA, Canadapa

	HD2-FBPS-1.500 Fieldbus Power Hub, Power Supply Module
	Output: 28 ... 30 V/500 mA, High-power trunk for high device count and long cable lengths, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	HD2-DM-A.RO Fieldbus Power Hub, Advanced Diagnostic Module with Relay Output
	Diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

Všeobecné poznámky týkající se produktů společnosti Pepperl+Fuchs

Rychlý odkaz

Aplikace IIoT ve zpracovatelských odvětvích

Technologie Ethernet-APL umožňuje nepřetržitou komunikaci napříč všemi hierarchickými úrovněmi. Další informace o průkopnické technologii…

Informační služba RSS pro aktualizace systém PANOS

Buďte informováni o vydání nové aktualizace softwaruPANOS, operačního systému pro přepínače Ethernet-APL: Díky našemu informačnímu kanálu RSS obdržíte ihned po vydání aktualizace e-mailové upozornění do své e-mailové schránky.

FieldConnex® – Sběrnice snadněji

Od rozhodování a plánování přes instalaci a uvedení do proozu až po provoz a údržbu: Objevte, jak co nejlépe využít svou sběrnicovou infrastrukturu…

Technologie

Provozní sběrnice v bezpečných prostředích i prostředích s nebezpečím výbuchu

Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
phone +420 225 989 180

Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.