国を選択してください

グローバルサイトへ

販売終了

NVO5-111 Warning Device for Containers and Tanks

主なメリットの概要

  • 230 V AC supply voltage
  • Two independent, potential-free change-over contacts
  • Visual and acoustic alarm
  • Connection to central monitoring system
  • Easy installation on DIN rail

もっと見る

Approval symbol
注記

Pepperl+Fuchs GmbH または Pepperl+Fuchs AG の名義で、会社形態の変更前に発行された証明書、適合宣言書などの製品関連文書はすべて、Pepperl+Fuchs SE に対しても有効です。

EN
  • EN
  • DE

NVO5-111の技術データ

Connectionterminals 5, 6, 7
Rated voltageUr230 V AC ± 10 %, 50/60 Hz
Fusingmax. 10 A
Power consumption6 VA
Display elementsLED SUPPLY (power supply), one yellow LED
LED SYSTEM OK (indication operating status), one green LED
LED ALARM (alarm active), one yellow LED
LED SENSOR FAILURE (sensor fault), one red LED
Control elementsbutton ALARM RESET: reset of the alarm relays and of the acoustic alarm
Surge protectionovervoltage category III
Connectioninput 1: sensors KVF/NVF terminals 13+, 15-
input 2: ON/OFF switch terminals 22+, 24-
Connectionoutput 1: terminals 1, 2, 3; output 2: terminals 10, 11, 12
Outputrelay , volt-free change-over contact
Contact loading250 V AC/4 A/100 VA
Output/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Output/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Electromagnetic compatibility
Directive 2004/108/ECEN 61000-6-2, EN 61000-6-3
Low voltage
Directive 2006/95/ECEN 50178:1997
Galvanic isolationEN 50178
Degree of protectionIEC 60529
Ambient temperature-25 ... 60 °C (-13 ... 140 °F)
Degree of protectionIP20
Massapprox. 325 g
Dimensions70 x 86 x 58 mm (2.8 x 3.4 x 2.3 inch)
Height86 mm
Width70 mm
Length58 mm
MountingDIN rail, system M36
EU-type examination certificateBVS 09 ATEX E 137
MarkingEx-Hexagon II (1)G [Ex ia] IIB
VoltageUoinput 1: 21 V ; input 2: 12.7 V
CurrentIoinput 1: 256 mA ; input 2: 51 mA
PowerPoinput 1: 1.16 W ; input 2: 0.32 W
Internal resistanceRiinput 1: 162.7 Ω ; input 2: 669 Ω
External capacitanceCoinput 1: 0.5 µF ; input 2: 1.8 µF
External inductanceLoinput 1: 0.5 mH ; input 2: 5 mH
Supply
Maximum safe voltageUm253 V AC DC (Attention! Um is no rated voltage.)
Output
Maximum safe voltageUm253 V AC (Attention! Um is no rated voltage.)
Directive conformity
Directive 94/9/ECEN 60079-0:2006, EN 60079-11:2007, EN 600079-14:2003
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
一般的な注意事項

関連ページ

さらに詳しい情報をお探しですか?関連ページでぜひご覧ください。