国を選択してください

グローバルサイトへ

DTM Generic HART Device Type Manager

Device type manager (DTM) for HART communication

主なメリットの概要

  • Device DTM
  • For HART multiplexers
  • Communication DTM
本ソフトウェアをダウンロードすることにより、お客様はライセンス条件に同意したものとみなされます。
ダウンロード
注記

Pepperl+Fuchs GmbH または Pepperl+Fuchs AG の名義で、会社形態の変更前に発行された証明書、適合宣言書などの製品関連文書はすべて、Pepperl+Fuchs SE に対しても有効です。

EN
  • EN
  • DE
  • ES
  • FR
  • PL

DTM Generic HARTの技術データ

DescriptionUniversal DTM for parameterization of individual HART sensors via "universal" commands and "common practice" commands (manufacturer: ICS)*
* Note: DTMs only work in conjunction with FDT frame application e. g. PACTware.
Hardware requirements- processor min. 500 MHz
- working memory: min. 256 MB
- hard disk space: min. 200 MB
- graphic resolution 1024 x 768
Depending on the complexity of the project and the DTMs used, the memory requirement may be several times higher.
Software requirementsoperating system:
- Microsoft Windows 7, Windows 8 or Windows 10
internet browser:
- Microsoft Internet Explorer 4.0 or higher
software components for installation
- Microsoft .Net Framework 3.5 or higher
- FDT framework program PACTware 5.X or higher
- the application-specific device type manager
LanguagesGerman, English, French, Spanish, Russian can be selected
InstallationAdministrator rights are required For installation in Windows.
Configuration
Representation of the system configurationGraphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously.
System planning, application processingGeneration of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels.
一般的な注意事項