국가 선택
SLCS14 Safety Light Curtain
Safety light curtain
주요 혜택 한눈에 보기
- Resolution 14 mm (finger protection)
- Protection field height up to 1200 mm
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- SIL3 (IEC 61508)
- Degree of protection IP67
- Temperature range -35 ... 60°C (-31 ... 140 °F)
- Slim design, mounting on three sides
더 보기









참고
Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.
EN
- EN
- DE
- ES
- IT
SLCS14 기술 데이터
| Effective detection range | 0.4 ... 8 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Protection field height | see Table 1, max. 1200 mm | |
| Operating mode | Startup/restart disable, deactivateable | |
| Optical resolution | 14 mm | |
| Opening angle | < 5 ° | |
| Ambient light limit | Not sensitive to ambient light in accordance with IEC 61496-2 | |
| UL File Number | E215245 |
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| Category | Cat. 4 | |
| Mission Time (TM) | 20 a | |
| PFHd | Depending on the protection field height; see Manual | |
| Type | 4 |
| Operation indicator | green: Power on | |
| Function indicator | Green: OSSD ON , Red: OSSD OFF | |
| Status indicator | Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, operating reserve, or error |
| Operating voltage | UB | 24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC |
| No-load supply current | I0 | Transmitter unit:≤ 150 mA Receiver: ≤ 150 mA (without outputs) |
| Protection class | III , IEC 61140 | |
| Power consumption | P0 | Transmitter unit: 5 W Receiver: 15 W |
| Input type | Transmitter unit test | |
| Input format | Break contact | |
| Switching voltage | 24 V DC | |
| Input current | 5 mA |
| Input type | Transmitter unit, mode A/B | |
| Function | Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA |
| Input type | Receiver unit relay monitor | |
| Input format | Break contact | |
| Switching voltage | 24 V DC | |
| Input current | 5 mA |
| Input type | Receiver unit, start release | |
| Input format | Break contact | |
| Input current | 5 mA |
| Input type | Receiver unit, mode A/B (see transmitter unit, mode A/B) |
| Response time | see Table 1, max. 54 ms |
| Output type | Receiver unit OSSD | |
| Signal output | PNP semiconductor , monitored for short and cross circuits | |
| Switching voltage | ON: UB - 2 V; OFF: < 1 V | |
| Switching current | ON: max. 0.1 A; OFF: < 5 µA |
| Output type | Receiver signal output start readiness | |
| Signal output | PNP-semiconductor, short-circuit protected, 0.1A |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 | |
| Product standard | EN 61496-1 ; IEC 61496-2 | |
| Photobiological safety | Risk group 0 according to IEC 62471 |
| CE conformity | CE | |
| UKCA conformity | UKCA | |
| UL approval | cULus Listed | |
| TÜV approval | TÜV SÜD |
| Ambient temperature | -35 ... 60 °C (-31 ... 140 °F) | |
| Storage temperature | -35 ... 70 °C (-31 ... 158 °F) | |
| Relative humidity | max. 95 %, non-condensing | |
| Shock resistance | 10 g , 16 ms ; stationary applications only | |
| Vibration resistance | 0.35 mm , 10 ... 55 Hz ; stationary applications only |
| Housing length L | see table 2 | |||||||
| Degree of protection | IP67 , For indoor use only | |||||||
| Connection | Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 50 m | |||||||
| Material | ||||||||
| ||||||||
| Mass | see table 2 | |||||||
| Dimensions | ||||||||
| ||||||||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
관련 페이지
더 많은 정보를 찾고 계신가요? 관련 페이지에서 자유롭게 자세히 알아보세요.
