글로벌 웹사이트로 이동
Single-channel terminal amplifier with line breakage detection, input for NAMUR sensors, DC 24 V supply voltage, standardized interface to prevent signal transmission errors, switching state display, LED yellow
Speed monitoring up to 40 kHz, 1 pre-select value with relay output and LED indicator, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Start-up delay, Menu driven operation via 4 front keys, Housing width: 40 mm, Rated voltage: 196 ... 250 V AC , 98 ... 127 V AC , 50/60 Hz , 20 ... 30 V DC, Relay: 1 changeover contact , NO, NC, COM
Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output, (Spacing factor 1 ... 9999), Multi-range power pack, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Rated voltage: 196 ... 250 V AC , 98 ... 127 V AC , 50/60 Hz , 20 ... 30 V DC, Connectable sensor types: NAMUR sensors according to DIN EN 60947-5-6, Connection: terminals 7+, 13- sensor supply, terminals 14, 15 NPN/PNP input (galvanically isolated)
Bright, high contrast 5-digit LED indicator, Leading zero suppression, Adjustable decimal point, Maximum- and minimium-value display, Integrated counter with specific scaling, Operating voltage: 10 ... 30 V DC, Dimensions: 48 mm x 24 mm x 65 mm
2 adjustable trip values, 2 relay outputs, Operation via keypad, Characteristic programmable via 12 interpolation points, Resetting the outputs, automatic, manual or with external signal, Operating voltage: 10 ... 30 V DC, Relay: changeover contact, Dimensions: 96 mm x 48 mm x 102 mm
2 adjustable trip values, 2 relay outputs, Operation via keypad, Characteristic programmable via 12 interpolation points, Resetting the outputs, automatic, manual or with external signal, Operating voltage: 90 ... 260 V AC, Relay: changeover contact, Dimensions: 96 mm x 48 mm x 102 mm
Multifunction device with operating modes for incremental rotary encoders, SSI absolute rotary encoders, and rotary encoders with start/stop interface, 16 bit analog output, configurable for voltage or current operations, USB interface and RS232/RS485 interface for configuration and readout, Extremely short conversion times, User-definable, non-linear characteristic curve with 24 interpolation points, Operating voltage: 18 ... 30 V DC, Input type: Incremental
Multifunction device with operating modes for incremental rotary encoders, SSI absolute rotary encoders, and rotary encoders with start/stop interface, USB interface for configuring and reading, Extremely short conversion times, User-definable, non-linear characteristic curve with 24 interpolation points, Auxiliary voltage output 5 V DC and 24 V DC for rotary encoder supply, Operating voltage: 10 ... 30 V DC, Input type: Incremental, Input format: RS422, TTL, HTL differential, HTL PNP, or HTL NPN
PNP and NPN sensors can be connected, Easy-to-read 7-digit LCD display, Degree of protection IP65 (front only), Operating voltage: 10 ... 30 V DC, Dimensions: 48 mm x 24 mm x 53.5 mm
Counter/Timer, Adding/subtracting via 2 separate inputs, Batch controller with 1 pre-selection, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status, Display range and preselection range from -999999 up to 999999, Overflow will be evaluated correctly up to 1 decade, Operating voltage: 230 V AC, Relay: changeover contact, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer, Adding/subtracting via 2 separate inputs, Batch controller with 1 pre-selection, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status, Display range and preselection range from -999999 up to 999999, Overflow will be evaluated correctly up to 1 decade, Operating voltage: 11 ... 30 V DC, Relay: changeover contact, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Multicolor display, Operating voltage: 90 ... 260 V AC, Relay: changeover contact , Make contact, Output I: Relay with make contact, NC or NO progr., Output II: Relay with changeover contact, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Multicolor display, Operating voltage: 10 ... 30 V DC, Relay: changeover contact , Make contact, Output I: Relay with make contact, NC or NO progr., Output II: Relay with changeover contact, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, 2 potential-free optocoupler outputs, Easy-to-read 2-line LCD display, color, with icons for the displayed preselection and the status of both outputs, Operating voltage: 90 ... 260 V AC, Optocoupler: Schaltleistung 30 V DC / 10 mA, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, 2 potential-free optocoupler outputs, Easy-to-read 2-line LCD display, color, with icons for the displayed preselection and the status of both outputs, Operating voltage: 10 ... 30 V DC, Optocoupler: Schaltleistung 30 V DC / 10 mA, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 6 pre-selections, 6 floating optocoupler outputs, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and the status of the two outputs, Operating voltage: 90 ... 260 V AC, Optocoupler: output 1 to 6, NPN-Opto coupler, output 3 to 6 with common emitter, Schaltleistung 30 V DC / 10 mA, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 6 pre-selections, 6 floating optocoupler outputs, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and the status of the two outputs, Operating voltage: 10 ... 30 V DC, Optocoupler: output 1 to 6, NPN-Opto coupler, output 3 to 6 with common emitter, Schaltleistung 30 V DC / 10 mA, Dimensions: 48 mm x 48 mm x 109.8 mm
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Display range and preselection range from -999999 up to 999999, Overflow will be evaluated correctly up to 1 decade, Operating voltage: 90 ... 260 V AC, Relay: changeover contact , Make contact, Output I: Relay with make contact, NC or NO progr.
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Display range and preselection range from -999999 up to 999999, Overflow will be evaluated correctly up to 1 decade, Operating voltage: 10 ... 30 V DC, Relay: changeover contact , Make contact, Output I: Relay with make contact, NC or NO progr., Output II: Relay with changeover contact
Counter/Timer/Tachometer, Extremely bright, large LED indicator, 1 pre-select value with transistor output, Adding/subtracting via 2 separate inputs, PNP and NPN sensors can be connected, Operating voltage: 10 ... 30 V DC, Dimensions: 96 mm x 48 mm x 89.4 mm
1-channel terminal amplifier, NAMUR sensor input, DC 24 V supply voltage, Standard interface for prevention of signal transmission errors, Switching status indicator, yellow LED, Operating voltage: 10 ... 30 V DC, Connectable sensor types: NAMUR, Transistor: NPN
1-channel terminal amplifier, NAMUR sensor input, DC 24 V supply voltage, Standard interface for prevention of signal transmission errors, Switching status indicator, yellow LED, Operating voltage: 10 ... 30 V DC, Connectable sensor types: NAMUR, Transistor: PNP
Relay output with 1 pole, yellow LED indicates switching state, Free-wheeling diode, Compact terminal housing, Clips onto standard 35 mm rail to DIN EN 50 022, Degree of protection IP20, Operating voltage: 24 V DC ± 15 %, Connectable sensor types: PNP or NPN 3-wire sensors, Relay: 1 changeover contact
Electromechanical summator, 5 decade devices, Counter frequency 10 Hz, Manual reset, Power supply 24 V DC, Operating voltage: 24 V DC, Dimensions: 48 mm x 24 mm x 59 mm
Electromechanical summator, 5 decade devices, Counter frequency 10 Hz, Manual reset, Power supply 230 V AC, Operating voltage: 230 V AC, Dimensions: 48 mm x 24 mm x 59 mm
Electromechanical summator, 7 decade devices, Counter frequency 10 Hz, Without reset, Power supply 24 V DC, Operating voltage: 24 V DC, Dimensions: 48 mm x 24 mm x 54 mm
Electromechanical summator, 7 decade devices, Counter frequency up to 25 Hz, Without reset, Power supply 230 V AC, Operating voltage: 230 V AC, Dimensions: 48 mm x 24 mm x 54 mm
Electromechanical summator, 7 decade devices, Counter frequency up to 25 Hz, Without reset, Power supply 24 V DC, Operating voltage: 24 V DC, Dimensions: 32 mm x 15 mm x 36 mm
Counter frequency up to 20 kHz, LED indicator, red, 6 decade devices, Operation via keypad, Two counter inputs, Operating voltage: 10 ... 30 V DC, Dimensions: 48 mm x 24 mm x 65 mm
Counter frequency up to 20 kHz, LED indicator, red, 6 decade devices, Operation via keypad, Two counter inputs, Operating voltage: 10 ... 30 V DC, Optocoupler: Semiconductor output 30 V, max. 10 mA, Dimensions: 48 mm x 24 mm x 65 mm
Counter/Timer/Tachometer, Extremely bright, large LED indicator, 1 pre-select value with transistor output, PNP and NPN sensors can be connected, Adding/subtracting via 2 separate inputs, Operating voltage: 90 ... 260 V AC, Optocoupler: NPN, open collector and open emitter , 30 V / 15 mA, Dimensions: 96 mm x 48 mm x 90 mm
Simple pre-selection setting via one button per decade, Easy-to-read 2-line LCD indicator, With battery operation, Relay output, Input for keypad locking, Operating voltage: Battery 2 x 3.6 V, Relay: normally open contact (max. 60 VA), 230 V AC/0.5 A; 60 V DC/2 A, Dimensions: 48 mm x 48 mm x 85 mm
Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output, (Spacing factor 1 ... 9999), 2-, 3-, 4-wire sensors and rotary encoder can be connected, Auxiliary power output for sensors, Rated voltage: 20 ... 30 V DC, Connection: terminals 7+, 13- sensor supply, terminals 14, 15 NPN/PNP input (galvanically isolated), Analog voltage output: 0 ... 10 V DC; 2 ... 10 V DC; 30 mA max.; resolution: 12 mV; Ri ≅ 330 Ω (terminal 5+, 6-)
Timer/hour meter, Separate start input available, Easy-to-read 7-digit LCD display, Lockable reset, Degree of protection IP65 (front only), Operating voltage: 10 ... 30 V DC, Dimensions: 48 mm x 24 mm x 53.5 mm
Temperature display in °C or °F, Resolution up to 0.1 °C, Extremely bright, large LED indicator, RTD types Pt100, Ni100 in 2-, 3-, or 4-wire mode, Galvanic isolation, Operating voltage: 10 ... 30 V DC galvanically isolated, Dimensions: 48 mm x 24 mm x 68.3 mm
Temperature display in °C or °F, Resolution up to 0.1 °C, Extremely bright, large LED indicator, For thermocouples J, K, and N, Galvanic isolation, Operating voltage: 10 ... 30 V DC galvanically isolated, Dimensions: 48 mm x 24 mm x 68.3 mm
Multifunction device with operating modes such as rev counter, other counters, throughput time display, position display, timer for runtimes, stopwatch, and process display, HTL inputs for encoders and sensors with NPN, PNP and NAMUR characteristics, Bright, high-contrast display with event-dependent color versions, Emulation of a seven-segment display with symbols and units, Auxiliary voltage output 5/24 V DC for encoder supply, Operating voltage: 115 ... 230 V AC, 50 ... 60 Hz
Multifunction device with operating modes such as rev counter, other counters, throughput time display, position display, timer for runtimes, stopwatch, and process display, HTL inputs for encoders and sensors with NPN, PNP and NAMUR characteristics, Bright, high-contrast display with event-dependent color versions, Emulation of a seven-segment display with symbols and units, Auxiliary voltage output 5/24 V DC for encoder supply, Operating voltage: 18 ... 30 V DC
39 / 39
방문해 주셔서 감사합니다. 이 페이지는 신속한 번역 콘텐츠 제공을 위해 AI로 번역되었습니다. 도움이 되셨나요? 여러분의 의견을 들려주시면 큰 도움이 됩니다.