국가 선택
M-LB-4400 Fault Status Module
주요 혜택 한눈에 보기
- Monitoring of up to 50 surge protection barriers
- Two-part monitoring device
- Device set with transmitter/receiver and reverse unit
- Fault indication via LED
- Status indication output
더 보기






참고
Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.
EN
- EN
- DE
- ES
- FR
- PL
M-LB-4400 기술 데이터
| Voltage range | 6 ... 35 V DC | |
| Rated current | Ir | ≤ 10 mA |
| Connection | terminals 11, 12 | |
| Switching power | 48 V DC/500 mA/Pmax 300 mW | |
| Output | signal ; remote signalling contact (NC contact) | |
| Leakage current | < 1 µA | |
| Resistor | contact resistance : < 2.5 Ω | |
| Test cycle | continuous |
| Display elements | status display operating state (green) fault indication (red) |
| Electromagnetic compatibility | |||||
| |||||
| Degree of protection | IEC 60529:2013 | |
| Functional safety | IEC/EN 61508:2010 |
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | max. 95 % , without condensation | |
| Corrosion resistance | acc. to ISA-71.04, severity level G3 |
| Degree of protection | IP20 | ||||
| Connection | spring terminals with push-in connection technology | ||||
| Core cross section | 0.2 ... 2.5 mm2 one wire 0.2 ... 2.5 mm2 fine-strand | ||||
| Material | |||||
| |||||
| Mass | approx. 52 g | ||||
| Dimensions | 6 x 90 x 69 mm (0.24 x 3.5 x 2.7 inch) (W x H x D) | ||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||
| Certificate | TÜV 22 ATEX 8882 X | ||||
| |||||
| Directive conformity | |||||
| |||||
| UL approval | E223772 | |||||||
| IECEx approval | ||||||||
| ||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
관련 뉴스 및 애플리케이션
이 제품과 관련된 뉴스 및 애플리케이션에 대해 자세히 알아보세요.


