판매 종료

KFD2-ELD-Ex16 Ground Fault Detection

24 V DC

주요 혜택 한눈에 보기

  • 16-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • Analog or digtial field device inputs
  • Monitors leakage current
  • Fault relay contact output
  • LED status indication
  • Test circuit for validation
  • Parallel connection for easy integration
  • Conformal coating

더 보기

Product Compliance: Europe – CE
Approval symbol
참고

Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.

EN
  • EN
  • DE
  • ES
  • FR
  • PL

KFD2-ELD-Ex16 기술 데이터

Signal typeAnalog input
ConnectionPower Rail or terminals 44+, 45-
Rated voltageUr20 ... 30 V DC
Ripple≤ 10 %
Rated currentIr≤ 50 mA
Connection sidefield side
Connectionintrinsically safe: terminals 1 ... 16
non-intrinsically safe: terminals 28, 29
Ground connectionterminal 17
Rated values5 Vpp, 0.1 mA; rectangular
FunctionTest input: 24 V DC / 5 mA; non-polarized
Connection sidecontrol side
Connectionterminals 19, 20, 21
Outputsignal ; relay
Contact loading253 V AC/2 A /cos φ > 0.7; 40 V DC/2 A resistive load;
Mechanical life107 switching cycles
Response delay≤ 50 s
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Display elementsLEDs
Control elementsDIP switch
Configurationvia DIP switches
Labelingspace for labeling at the front
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Electromagnetic compatibilityNE 21:2007
Degree of protectionIEC 60529:2001
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Degree of protectionIP20
Connectionscrew terminals
Massapprox. 260 g
Dimensions60 x 119 x 115 mm (2.4 x 4.7 x 4.5 inch) (W x H x D) , housing type D2
Height119 mm
Width60 mm
Depth115 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificateTÜV 00 ATEX 1585
MarkingEx-Hexagon II (1)G [Ex ia Ga] IIC
[exsign] II (1) D [Ex ia Da] IIIC
[exsign] I (M1) [Ex ia Ma] I
VoltageUo7.2 V
CurrentIo1.7 mA
PowerPo3 mW
Supply
Maximum safe voltageUm40 V DC (Attention! The rated voltage can be lower.)
Collective error message
Maximum safe voltageUm40 V (Attention! The rated voltage can be lower.)
Galvanic isolation
Input/Outputsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supplysafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
일반 참고 사항