국가 선택
PS1000-A6-24.5 Power Supply
주요 혜택 한눈에 보기
- 100 V AC to 240 V AC wide-range input
- 1-phase
- Output 24 V DC, 5 A, 120 W
- Housing width 32 mm
- Efficiency up to 94.3 %
- Minimal inrush current surge
- DC OK relay contact
- Suitable for Zone 2/Div. 2 mounting
더 보기



참고
Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.
EN
- EN
- DE
- ES
- FR
- PL
PS1000-A6-24.5 기술 데이터
| Efficiency | 93.6 % at 120 V AC 94.3 % at 230 V AC | |
| Power dissipation | 8.2 W at 120 V AC 7.3 W at 230 V AC |
| Voltage range | 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %) 110 ... 150 V DC (±20 %) | |
| Current | 1.09 A at 120 V AC 0.6 A at 230 V AC 1.21 A at 110 V DC for lower output currents see technical information | |
| Inrush current | 5 A peak at 120 V AC and ambient temperature 40 °C (104 °F) 6 A peak at 230 V AC and ambient temperature 40 °C (104 °F) or ambient temperature 25 °C (77 °F) | |
| Capacity factor | 0.98 at 120 V AC 0.91 at 230 V AC |
| Rated voltage | Ur | 24 V DC |
| Voltage range | 24 ... 28 V DC factory setting: 24.1 V | |
| Rated current | Ir | 5 A |
| Current | 6 ... 5.1 A at ambient temperature < 45 °C (113 °F) 5 ... 4.3 A at ambient temperature 60 °C (140 °F) 3.8 ... 3.2 A at ambient temperature 70 °C (158 °F) linear power derating see technical information | |
| Power | 120 W | |
| Ripple | max. 50 mV pp | |
| Hold-up time | 35 ms at 120 V AC 35 ms at 230 V AC | |
| Overload behavior | continuous current at output voltage > 13 V DC Hiccup behaviour at output voltage < 13 V DC | |
| Short-circuit current | typ. 15 A for 12 ms or 3 A rms continuous current | |
| Voltage limitation | typ. 30.5 V DC max. 32 V DC |
| Connection | terminals 13, 14 | |
| Output type | relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage | |
| Contact loading | max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC |
| Input/Output | SELV/PELV |
| Display elements | LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage | |
| Control elements | potentiometer | |
| Configuration | setting of the output voltage via potentiometer |
| Electromagnetic compatibility | |||||
| |||||
| Low voltage | |||||
| |||||
| RoHS | |||||
| |||||
| Degree of protection | EN 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) , see technical information | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 5 ... 95 %, non-condensing | |
| Shock resistance | 20 g , 11 ms or 30 g , 6 ms | |
| Vibration resistance | 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g |
| Housing material | aluminum alloy , galvanized steel | |||||||
| Degree of protection | IP20 | |||||||
| Connection | ||||||||
| ||||||||
| Mass | approx. 440 g | |||||||
| Dimensions | 32 x 124 x 102 mm (W x H x D) , without DIN mounting rail | |||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |||||||
| ATEX approval | ||||||||
| ||||||||
| Directive conformity | ||||||||
| ||||||||
| UL approval | E350173 , E223176 | ||||||||||
| IECEx approval | |||||||||||
| |||||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
