UCC2500-50GK-B26-8MOL-Y Ultrasonic Sensor

Single head system

주요 혜택 한눈에 보기

  • Thread M50
  • PTFE coated transducer
  • Power save mode
  • Physical LIN interface
  • Serial Interfaces
  • Temperature compensation
  • 3 m connection cable

더 보기

Product Compliance: Europe – CE
Product Compliance: United Kingdom – UKCA
참고

Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.

EN
  • EN
  • DE
  • ES
  • FR

UCC2500-50GK-B26-8MOL-Y 기술 데이터

Sensing range150 ... 2500 mm
Dead band0 ... 150 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 120 kHz
Operating voltageUBfor UART and PWM operation:
UUART/PWM = 2.5 ... 5 V DC, typical 3.3 V
for LIN operation:
ULIN = 8 ... 18 V DC, typical 12 V
No-load supply currentI0≤ 60 mA at 3.3 V DC
≤ 20 mA at 12 V DC
Quiescent current indication< 3 µA during standby mode at UART- and PWM operation
Power consumptionP0≤ 250 mW in the measurement operating mode
Time delay before availabilitytv≤ 70 ms
Interface typePhysical LIN interface
Transfer rate19.2 kBit/s (8N1)
Cycle time55 ms
Resolution10 mm (corresponding to 1 LSB)
Interface typeUART 3.3V
Transfer rate19.2 kBit/s (8N1)
Cycle time55 ms
Resolution10 mm (corresponding to 1 LSB)
Input typeStandby active
Signal levellow: 0 ... 0.8 V
Output typePWM output (PNP) , deactivated
Electromagnetic compatibility
Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3
The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Connection typefixed cable with plug
Degree of protectionIP66 / IP67 ( connector excluded )
Material
HousingPBT
Transducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated
ConnectorMolex connector 70107-0007
Number of pins8
Cable
LengthL3000 mm ± 50 mm
Mass142 g
Dimensions
Height37 mm
Width50 mm
Length50 mm
Default settingAddress setting 7
Temperature compensation active
OutputPWM output (PNP) , deactivated
Beam widthwide
Scope of delivery2 nuts plastic
일반 참고 사항